Viewing OAM Status

Updated on 09 Aug 2024
3 Minutes to read
Contributors

Article summary

Did you find this summary helpful?

Thank you for your feedback

To view a summary of the status of each OAM instance

Access the page OAM ▶Status.
For details OAM status information, click the OAM instance Name in the list.

For more information on specific parameters, refer to the following tables.

OAM Status (OAM ▶Status)

Parameter	Description
Name	The name of the OAM instance.
Discovery	The current state of the OAM Discovery function. The states listed correspond to those within the discovery state diagram. LINK_FAULT ACTIVE_SEND_LOCAL PASSIVE_WAIT SEND_LOCAL_REMOTE SEND_LOCAL_REMOTE_OK SEND_ANY

Local

Parameter	Description
Local Flags Flags	A string of seven bits corresponding to the Flags field in the most recently transmitted OAMPDU. The seven LSB bits are expressed as a hexadecimal value. For example, a hexadecimal value of 0x0004 converted to binary is 0000100: first bit = 0, second bit = 0, third bit = 1, etc. The first bit corresponds to the Link Fault bit in the Flags field. The second bit corresponds to the Dying Gasp bit in the Flags field. The third bit corresponds to the Critical Event bit in the Flags field. The fourth bit corresponds to the Local Evaluating bit in the Flags field. The fifth bit corresponds to the Local Stable bit in the Flags field. The sixth bit corresponds to the Remote Evaluating bit in the Flags field. The seventh bit corresponds to the Remote Stable bit in the Flags field.
Local Revision Info TLV Revision	The value of the Revision field in the Local Information TLV of the most recently transmitted information OAMPDU. Note: The revision number indicates the number of times that the configuration for the local OAM instance has been modified.
Parser State/Mux State	A string of three bits corresponding to the State field of the most recently transmitted Information OAMPDU. The first and second bits correspond to the Parser Action bits in the State field. The third bit corresponds to the Multiplexer Action bit in the State field. Note: These states will change when a loopback is enabled.
Vendor OUI	The value of the OUI variable in the Vendor Identifier field of the most recently transmitted information OAMPDU. This value is updated upon reception of a valid frame.
Vendor-Specific Info	The value of the Vendor-Specific Information field of the most recently received information OAMPDU. This value is updated upon reception of a valid frame with the following: Destination field value equal to the reserved multicast address for Slow_Protocols. Length or Type field value equal to the reserved Type for Slow_Protocols. A Slow_Protocols subtype value equal to the subtype reserved for OAM. The OAMPDU code equal to the Information code. The frame contains a Local Information TLV.

Remote

Parameter	Description
Remote Flags Flags	A string of seven bits corresponding to the Flags field in the most recently received OAMPDU. The seven LSB bits are expressed as a hexadecimal value. For example, a hexadecimal value of 0x0004 converted to binary is 0000100: first bit = 0, second bit = 0, third bit = 1, etc. The first bit corresponds to the Link Fault bit in the Flags field. The second bit corresponds to the Dying Gasp bit in the Flags field. The third bit corresponds to the Critical Event bit in the Flags field. The fourth bit corresponds to the Local Evaluating bit in the Flags field. The fifth bit corresponds to the Local Stable bit in the Flags field. The sixth bit corresponds to the Remote Evaluating bit in the Flags field. The seventh bit corresponds to the Remote Stable bit in the Flags field.
Remote Revision Info TLV Revision	The value of the Revision field in the Local Information TLV of the most recently received information OAMPDU. This value is updated upon reception of a valid frame.
Parser State/Mux State	A string of three bits corresponding to the State field of the most recently received information OAMPDU. The first and second bits correspond to the Parser Action bits in the State field. The third bit corresponds to the Multiplexer Action bit in the State field. Note: These states will change when a loopback is enabled.
Vendor OUI	The value of the OUI variable in the Vendor Identifier field of the most recently received information OAMPDU.
Vendor-Specific Info	The value of the Vendor Specific Information field of the most recently received information OAMPDU.

© 2024 Cisco and/or its affiliates. All rights reserved.

For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms
For legal information about Accedian Skylight products, please visit: Accedian legal terms and tradmarks

Was this article helpful?

What's Next

Viewing OAM Statistics