Viewing Dry-Contact Alarms

Updated on 30 Mar 2022
1 Minute to read
Contributors

Article summary

Did you find this summary helpful?

Thank you for your feedback

To view the status of dry-contact-related alarms

Access the page System ▶Alarm ▶Dry-Contact
The dry-contact alarm status is displayed for each of the unit's inputs.

For more information on specific parameters, refer to the following table.

Dry-Contact Alarms (System ▶Alarm ▶Dry-Contact)

Parameter	Description
Operational State	The current state of the dry-contact input, i.e. Enabled or Disabled. When enabled, the alarm point for this input is created and the input is monitored.
Normal Input State	The input's normal state, i.e. Closed or Opened. An alarm is raised when the input state of the dry-contact is different from the normal state for more than three consecutive samples.
Input Pin State	The current state of the dry-contact input.

Parameter

Description

Operational State

The current state of the dry-contact input, i.e. Enabled or Disabled.

When enabled, the alarm point for this input is created and the input is monitored.

Normal Input State

The input's normal state, i.e. Closed or Opened.

An alarm is raised when the input state of the dry-contact is different from the normal state for more than three consecutive samples.

Input Pin State

The current state of the dry-contact input.

© 2024 Cisco and/or its affiliates. All rights reserved.

For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms
For legal information about Accedian Skylight products, please visit: Accedian legal terms and tradmarks

Was this article helpful?

What's Next

Managing Syslog Messages