Setting Up ARTS
  • 25 Sep 2024
  • 1 Minute to read
  • Contributors
  • PDF

Setting Up ARTS

  • PDF

Article summary

Accedian Remote Time Synchronization (ARTS) is an Cisco Provider Connectivity Assurance (formerly Accedian) proprietary protocol that provides the capability to synchronize a remote network element (next generation device) with the local clock of a Cisco Provider Connectivity Assurance Sensor Control system.

▶ To set ARTS

  1. Access the page System ▶ Configuration ▶ Time ▶ ARTS.

  2. Select the Enable option.

  3. Click Apply.


Note: ARTS settings can be edited from the Clock List by selecting a Clock name.

ARTS Parameters (System ▶ Configuration ▶ Time ▶ ARTS)

ParameterDescription
EnableEnable/Disable ARTS
Inbound criterionThreshold required to declare the device synchronized (100.000 msec).
Inbound statusError that is calculated based on the communication between Sensor Control and the synchronized module (in msec).
Synchronization statusSynchronized: The Inbound status is below the Inbound criterion.

Not synchronized: The Inbound status is over the Inbound criterion.

© 2024 Cisco and/or its affiliates. All rights reserved.
 
For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms

For legal information about Accedian Skylight products, please visit: Accedian legal terms and tradmarks



Was this article helpful?

Changing your password will log you out immediately. Use the new password to log back in.
First name must have atleast 2 characters. Numbers and special characters are not allowed.
Last name must have atleast 1 characters. Numbers and special characters are not allowed.
Enter a valid email
Enter a valid password
Your profile has been successfully updated.