.svg?sv=2022-11-02&spr=https&st=2024-10-16T00%3A31%3A07Z&se=2024-10-16T00%3A41%3A07Z&sr=c&sp=r&sig=4NPe%2BugigBmdOSzUTCDV5Z0lVj5LrtJIeNPeqkH3x8U%3D){kind=logo}
Module Dock Release Notes 24.09
- 13 Sep 2024
- 2 Minutes to read
- Contributors
- Print
- PDF
Module Dock Release Notes 24.09
- Updated on 13 Sep 2024
- 2 Minutes to read
- Contributors
- Print
- PDF
Article summary
Did you find this summary helpful?
Thank you for your feedback
These release notes cover the requirements, new features, changes, addressed issues, and known limitations for the Module Dock version 24.09. Read all release notes before installing this firmware version.
Note: The Module Dock is never forward compatible towards new/future Cisco Provider Connectivity Assurance Sensor Control and Cisco Provider Connectivity Assurance Sensor Modules releases. If you intend to use the Module Dock with Sensor Modules that are a newer release than the Module Dock, this is not supported and may damage your Module. Additionally, if you upgrade Modules to a newer release than the Module Dock, this is not supported and may damage your Module. Make sure the Module Dock release level is always equal to or higher than that of the Modules you connect it to.
Requirements
This firmware version applies to the Module Dock:
Product Name | Software Version | Build Number | Software Files |
Module Dock | 24.09 | AMD_24.09.0_25920 | AMD_24.09.0_25920.afl |
New Features
This Assurance Sensor Control release introduces the following new features and enhancements.
Cisco Provider Connectivity Assurance Module Dock 24.09
The Cisco Provider Connectivity Assurance Module Dock 24.09 can be used to configure the 24.09 firmware suite.
Cisco Hardware Branding for Module Dock
Hardware units have been rebranded for the Cisco Provider Connectivity Assurance Module Dock.
Cisco Software Branding for Module Dock
Software has been rebranded for the Cisco Provider Connectivity Assurance Module Dock.
Cisco UDI on Sensor Modules and Module Dock
Added Cisco Unique Device Identifier (UDI) into the EEPROM, which is readable in software, using board show info or equivalent from the CLI only. This UDI is composed of the product ID, Version, and Cisco serial number.
Corrected Issues
None
MIB Changes
None
Release 24.09 Lifecycle
This section lists the planned lifecycle dates for this release.
Milestone | Description | Date |
General Availability | Date where the product is available for general field deployment for both new installations and upgrades. | 2024-09-13 |
End of Security Support | Date where security patches will no longer be delivered for this release. Any correctives for security defects required after this date will be delivered using the next major release of the software. | Next Major Release |
Last Time Buy / Last Time Ship | Date where this release can no longer be purchased. | 2026-09-13 |
End of Product Support | Date where functional patches will no longer be delivered for this release. Any correctives for functional defects required after this date will be delivered using the next major release of the software. | 2026-09-13 |
End of Technical Support | Date where technical assistance is no longer available from the Technical Assistance Center for this release. | 2029-09-13 |
© 2024 Cisco and/or its affiliates. All rights reserved.
For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms
For legal information about Accedian Skylight products, please visit: Accedian legal terms and tradmarks
Was this article helpful?