Features and User Material

The following instructions will help ensure safe and proper usage of the Cisco Provider Connectivity Assurance Module Dock when initially configuring it for any of the supported operating systems: Microsoft Windows Linux Consult the Ci...

The Web-based management interface provides access to all system control, management and monitoring functions. The management station is the computer that you use to connect to the management Web interface; it must be equipped with a JavaScript-en...

Use the Module Dock to pre-stage the parameters of a connected remote device. The device parameters you can configure with a Module Dock include IPv4 addresses (either static or assigned via DHCP) and the VLAN interface type, as well as the Fl...

New firmware versions typically provide new and/or enhanced features, as well as defect corrections. It is recommended to only perform firmware updates in accordance with instructions per Technical Support. To verify the current firmware version r...

With the Module Dock , you can access a specific feature suite to be applied as needed to the remote devices connected to it. Use this page to import and delete feature suites. You can also import new feature suites here as they become available. ...

Use the System Information page to learn details pertaining to the Module Dock , as well as general system information. To view this page, access the page AMD System ▶ Information . Module Dock System Information (AMD System ▶ Information) ...

Use the System Interface page to customize certain Module Dock features. Note : The Module Dock 's IP network mask has been set to 255.255.255.0 and cannot be changed. To manage the Module Dock 's system configuration Access...

New firmware versions typically provide new and/or enhanced features. It is recommended to only perform firmware updates in accordance with instructions per Technical Support. To verify the current firmware version running on the Module Dock dev...

Rebooting the unit is required in order to apply a system firmware update. You must also reboot after updating certain configuration values. To restart the Cisco Provider Connectivity Assurance Module Dock Access the page AMD System ▶ F...