Connecting to the Board
There is an RJ45 console as a serial connection, 115200 N81; this console displays boot messages as it is a connection to the unit. The default user is root, the default password is admin123.
SSH and Telnet connections over IPv4 are supported after IP address configuration.
Note: Telnet is disabled by default and must be configured. See Enabling Telnet.
SSH Procedure
From a Linux server, the following command establishes an SSH client session with the specified OOB management interface IP address.
- The following command should be used for CLI reachability via management port from a host.
#ssh -o KexAlgorithms=diffie-hellman-group14-sha1 root@<flex-ip-address>
© 2025 Cisco and/or its affiliates. All rights reserved.
For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms
For legal information about Accedian Skylight products, please visit: Accedian legal terms and tradmarks