Setting OUI (Organizational Unit Identifier)

Prev Next

This article describes the steps required to configure the OUI globally on a device.

CLI Configurations

To configure the OUI globally on a device

  1. Enter into the global configuration mode
    your product# configure terminal

  2. Set the OUI
    your product(config)# set ethernet-cfm oui 02:03:04.


    Note: Default value corresponds to the first three bytes of the System MAC Address.

  3. Return to the Privileged Exec Mode.
    your product(config)# exit

To set the OUI to default value

  1. Enter into the global configuration mode and reset the OUI to the default value.
    your product(config)# no set ethernet-cfm oui.

SNMP Configurations

  1. Configure the OUI globally on a device. [Index: ContextID = 0]
    % snmp0 set {{fsMIEcfmOui.0 aa:bb:cc }}

© 2025 Cisco and/or its affiliates. All rights reserved.
 
For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms

For legal information about Accedian Skylight products, please visit: Accedian legal terms and tradmarks