Enabling LLC Encapsulation on Interface

This article describes the steps to enable the CFM PDU encapsulation in LLC header on the specified port.

CLI Configurations

To enable LLC encapsulation on a port

1. Enter into the global configuration mode.
   your product# configure terminal

2. Enter into the interface configuration mode.
   your product(config)# interface gigabitethernet 0/10

3. Enable the LLC encapsulation on the port.
   your product(config-if)# ethernet cfm llc-encap enable

4. Return to the global configuration mode.
   your product(config-if)# exit

To disable LLC encapsulation

1. Enter into the interface configuration mode and disable the ECFM.
   your product(config-if)# ethernet cfm llc-encap disable

SNMP Configurations

1. Enable the LLC encapsulation on a port. [Index: Interface Number = 1]
   % snmp0 set {{fsMIEcfmPortLLCEncapStatus.1 true }}

2. Disable the LLC encapsulation on a port. [Index: Interface Number = 1]
   % snmp0 set {{fsMIEcfmPortLLCEncapStatus.1 false }}