Configuring MIP and Verifying Configured MPs (MEP and MIP)

This article describes the configuration of Default Domain with VLAN and MdLevel for MIP creation, and configuration of MIP in the default domain on the bridge CUST2. Furthermore, it describes how to verify configured MPs (both MEP and MIP).

CLI Configurations

At CUST2

• Configure default domain and MIP
  your product(config) # ethernet cfm default-domain vlan 2 level 5
  your product(config)# interface gigabitethernet 0/2
  your product(config-if)# ethernet cfm mip level 5 vlan 2 active

SNMP Configurations

At CUST2

• Configure default domain and MIP
  [Index: ContextID = 0]
  % snmp0 set {{fsMIEcfmDefaultMdDefMhfCreation.0 defMHFdefault }}
  % snmp0 set {{fsMIEcfmDefaultMdDefLevel.0 5 }}
  [Index: Interface Number = 2, MD-level=5, Vlan = 2]
  % snmp0 set {{fsMIEcfmMipRowStatus.2.5.2 createAndWait }}
  % snmp0 set {{fsMIEcfmMipRowStatus.2.5.2 active }}

Verifying Configured MPs (MEP and MIP)

This section describes the verification of the configured MEP and MIP on the bridges.

CLI Configurations

At CUST1

• Display the details of all the MEPs and MIPs.

your product# show ethernet cfm maintenance-point local

--------------- ---------------------------------------
MPID  DomainName  Level  VLAN   Type  Port   CC-Status
      ServiceName        ISID   Dir   MAC    MP-Status
------------------------------------------------------
10    OP1         5      2     MEP   Gi0/2   Enabled
     maop1               -     Down 00:01:02:03:04:02 Active

At CUST2

• Display the details of all the MEPs and MIPs.

your product# show ethernet cfm maintenance-point local

------------------------------------------------------
MPID  DomainName  Level  VLAN   Type  Port  CC-Status
      ServiceName        ISID   Dir   MAC   MP-Status
------------------------------------------------------
-    -            5      2     MIP   Gi0/2         -
     -            -      -   00:02:02:03:04:02 Active

At CUST3

• Display the details of all the MEPs and MIPs.
  your product# show ethernet cfm maintenance-point local

------------------------------------------------------
MPID  DomainName  Level  VLAN   Type  Port  CC-Status
      ServiceName        ISID   Dir   MAC   MP-Status
------------------------------------------------------
30    OP1          5      2    MEP  Gi0/2    Enabled
      maop1        -        Down 00:03:02:03:04:02 Active

SNMP Configurations

At CUST1

• Display the details of all the MEPs and MIPs.
  [Index: ContextID = 0, MD-Index = 1]
  % snmp0 get {fsMIEcfmMdFormat.0.1 }

{1.3.6.1.4.1.2076.160.1.0.4.1.2.0.1 INTEGER charString}

% snmp0 get {fsMIEcfmMdName.0.1 }

{1.3.6.1.4.1.2076.160.1.0.4.1.3.0.1 {OCTET STRING} 4F:50:31}

% snmp0 get {fsMIEcfmMdMdLevel.0.1 }

{1.3.6.1.4.1.2076.160.1.0.4.1.4.0.1 INTEGER 5}

[Index: ContextID = 0, MD-Index = 1, MA-Index = 1]
% snmp0 get {fsMIEcfmMaFormat.0.1.1 }

{1.3.6.1.4.1.2076.160.1.0.5.1.3.0.1.1 INTEGER charString}

% snmp0 get {fsMIEcfmMaName.0.1.1 }

{1.3.6.1.4.1.2076.160.1.0.5.1.4.0.1.1 {OCTET STRING} 6D:61:6F:70:31}

% snmp0 get {fsMIEcfmMaCcmInterval.0.1.1 }

{1.3.6.1.4.1.2076.160.1.0.5.1.7.0.1.1 INTEGER interval1s}

% snmp0 get {fsMIEcfmMaPrimaryVlanId.0.1.1 }

{1.3.6.1.4.1.2076.160.1.0.5.1.2.0.1.1 INTEGER 2}

[Index: ContextID = 0, MD-Index = 1, MA-Index = 1, MEP-ID = 10]
% snmp0 get {fsMIEcfmMepPrimaryVid.0.1.1.10 }

{1.3.6.1.4.1.2076.160.1.0.7.1.4.0.1.1.10 Unsigned32 0}

% snmp0 get {fsMIEcfmMepIfIndex.0.1.1.10 }

{1.3.6.1.4.1.2076.160.1.0.7.1.2.0.1.1.10 INTEGER 2}

% snmp0 get {fsMIEcfmMepDirection.0.1.1.10 }

{1.3.6.1.4.1.2076.160.1.0.7.1.3.0.1.1.10 INTEGER down}

% snmp0 get {fsMIEcfmMepActive.0.1.1.10 }

{1.3.6.1.4.1.2076.160.1.0.7.1.5.0.1.1.10 INTEGER true}

At CUST2

• Display the details of all the MEPs and MIPs.
  [Index: ContextID = 0]
  % snmp0 get {fsMIEcfmDefaultMdDefMhfCreation.0 }

{1.3.6.1.4.1.2076.160.1.0.1.1.5.0 INTEGER defMHFdefault}

% snmp0 get {fsMIEcfmDefaultMdDefLevel.0 }

{1.3.6.1.4.1.2076.160.1.0.1.1.4.0 INTEGER 5}

[Index: Interface Number = 2, MD-level=5, Vlan = 2]
% snmp0 get {fsMIEcfmMipRowStatus.2.5.2 }

{1.3.6.1.4.1.2076.160.1.1.6.1.5.2.5.2 INTEGER active}

At CUST3

• Display the details of all the MEPs and MIPs.
  [Index: ContextID = 0, MD-Index = 1]
  % snmp0 get {fsMIEcfmMdFormat.0.1}

{1.3.6.1.4.1.2076.160.1.0.4.1.2.0.1 INTEGER charString}

% snmp0 get {fsMIEcfmMdName.0.1}

{1.3.6.1.4.1.2076.160.1.0.4.1.3.0.1 {OCTET STRING} 4F:50:31}

% snmp0 get {fsMIEcfmMdMdLevel.0.1 }

{1.3.6.1.4.1.2076.160.1.0.4.1.4.0.1 INTEGER 5}

[Index: ContextID = 0, MD-Index = 1, MA-Index = 1]
% snmp0 get {fsMIEcfmMaFormat.0.1.1 }

{1.3.6.1.4.1.2076.160.1.0.5.1.3.0.1.1 INTEGER charString}

% snmp0 get {fsMIEcfmMaName.0.1.1 }

{1.3.6.1.4.1.2076.160.1.0.5.1.4.0.1.1 {OCTET STRING} 6D:61:6F:70:31}

% snmp0 get {fsMIEcfmMaCcmInterval.0.1.1 }

{1.3.6.1.4.1.2076.160.1.0.5.1.7.0.1.1 INTEGER interval1s}

% snmp0 get {fsMIEcfmMaPrimaryVlanId.0.1.1 }

{1.3.6.1.4.1.2076.160.1.0.5.1.2.0.1.1 INTEGER 2}

[Index: ContextID = 0, MD-Index = 1, MA-Index = 1, MEP-ID = 30]
% snmp0 get {fsMIEcfmMepPrimaryVid.0.1.1.30 }

{1.3.6.1.4.1.2076.160.1.0.7.1.4.0.1.1.30 Unsigned32 0}

% snmp0 get {fsMIEcfmMepIfIndex.0.1.1.30 }

{1.3.6.1.4.1.2076.160.1.0.7.1.2.0.1.1.30 INTEGER 2}

% snmp0 get {fsMIEcfmMepDirection.0.1.1.30 }

{1.3.6.1.4.1.2076.160.1.0.7.1.3.0.1.1.30 INTEGER down}

% snmp0 get {fsMIEcfmMepActive.0.1.1.30 }

{1.3.6.1.4.1.2076.160.1.0.7.1.5.0.1.1.30 INTEGER true}

• Wait for 5 seconds to check for any link failure (error/fault/defect)