Checking for Configured Remote Entities in the Network

This article describes the checking of configured MAs.

CLI Configurations

At CUST1

• Display information about all the configured CFM MAs
  your product# show ethernet cfm service

Service Name : maop1
Domain Name  : OP1
Index        : 1
Primary Vid  : 2
Level        : 5
MHF Creation Criteria : defer
Sender Id Permission  : defer
CC Role    : fault management
ICC Code   : maop1
UMC Code   : OP1
Total MEPs : 2
Primary Vlan Associations :
None
Crosscheck status : Enabled
Crosscheck:
MPID VLAN ISID      Type       Mep-Up Mac Address
10   2    -         Local       Yes   0:01:02:03:04:02
30   2    -         Remote      Yes  00:03:02:03:04:02

At CUST3

• Display information about all the configured CFM MAs
  your product# show ethernet cfm service

Service Name : maop1
Domain Name  : OP1
Index        : 1
Primary Vid  : 2
Level        : 5
MHF Creation Criteria : defer
Sender Id Permission  : defer
CC Role    : fault management
ICC Code   : maop1
UMC Code   : OP1
Total MEPs : 2
Primary Vlan Associations :
None
Crosscheck status : Enabled
Crosscheck:
MPID VLAN ISID      Type         Mep-Up Mac Address
10   2    -         Remote       Yes 00:01:02:03:04:02
30   2    -         Local        Yes 00:03:02:03:04:02

SNMP Configurations

At CUST1

• Display information about all the configured CFM MAs. [Index: ContextID = 0, MD-Index = 1, MA-Index = 1, MEP-ID = 10, RemoteMEP-ID =30]
  % snmp0 get {fsMIEcfmRMepMacAddress.0.1.1.10.30 }

{1.3.6.1.4.1.2076.160.1.0.11.1.6.0.1.1.10.30 {OCTET STRING} 00:03:02:03:04:02}

At CUST3

• Display information about all the configured CFM MAs. [Index: ContextID = 0, MD-Index = 1, MA-Index = 1, MEP-ID = 30, RemoteMEP-ID = 10]
  % snmp0 get {fsMIEcfmRMepMacAddress.0.1.1.30.10 }

{1.3.6.1.4.1.2076.160.1.0.11.1.6.0.1.1.30.10 {OCTET STRING} 00:01:02:03:04:02}