Configuring MEF 10.2 Coupled Color Aware

Updated on 06 Jul 2023
1 Minute to read
Contributors

Article summary

Did you find this summary helpful?

Thank you for your feedback

To configure MEF 10.2 coupled color aware

Follow configurations steps 1 through 7 from the article Configuring trTCM Color Blind Mode.
Configure MEF coupled color-blind metering.

configure terminal
meter 1
meter-type mefCoupled color-mode aware cir 1048576 cbs 16777216 eir 2097152 ebs 33554432  
end

Configure coupled QOS color-aware metering actions.

configure terminal
policy-map 10
set meter 1 exceed-action cos-transmit-set 5 violate-action cos-transmit-set 5
set policy class 10 default-priority-type none
end
configure terminal
set meter-st enable meter-id 1
end

Notes:
In MEF 10.2 coupled color aware mode, Green packet remarking is not supported (the configuration of green remarking priority values is not applicable, when metering entry is color aware) and only yellow, red packets remarking are supported.

Red packet remarking should be configured the same as yellow or drop.

Was this article helpful?

What's Next

MEF 10.3 Metering with Bucket Sharing Overview