Configuring MEF 10.2 Coupled Color Blind

Updated on 06 Jul 2023
1 Minute to read
Contributors

Article summary

Did you find this summary helpful?

Thank you for your feedback

To configure MEF 10.2 coupled color blind

Follow configurations steps 1 through 7 from the article Configuring trTCM Color Blind Mode.
Configure MEF coupled QOS color-blind metering.

configure terminal
meter 1
meter-type mefCoupled cir 1048576 cbs 16777216 eir 2097152 ebs 33554432  
end

Configure coupled QOS color-blind metering actions.

configure terminal
policy-map 10
set meter 1 conform-action cos-transmit-set 7 exceed-action cos-transmit-set 5 violate-action cos-transmit-set 3
set policy class 10 default-priority-type none
end
configure terminal
set meter-st enable meter-id 1
end

Note: In MEF 10.2 coupled color blind mode, Green packet, Yellow packet, and Red packet remarking are supported.

© 2024 Cisco and/or its affiliates. All rights reserved.

For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms
For legal information about Accedian Skylight products, please visit: Accedian legal terms and tradmarks

Was this article helpful?

What's Next

Configuring MEF 10.2 Coupled Color Aware