Platform Monitor Commands

This section presents a detailed description of the CLI commands used to configure and review the configuration of the Platform Monitor application.

Platform Monitor CLI commands are categorized as follows:

• Configuration Command
• Display Commands

Configuration Command

This section includes the Platform Monitor configuration command.

set dry-contact

Command Objective:
This command sets the configuration parameters of the dry-contact probe.

Syntax:
set dry-contact < id > { [state {enable|disable}] [interval <100-1000>] [name <1-127 characters>] [normalstate {close|open}] }

Parameter Description:

• < id > - The dry-contact input id <1|2>
• {state <enable|disable>] - Enable/Disable the dry-contact input operational state
• {interval <100-1000>} - Interval at which the probe will collect data. From 100 to 1000 milliseconds, expressed in steps of 100 milliseconds.
• {name <1-127 characters>] - Dry-contact input name
• {normalstate {close|open}} - Normal state of the dry-contact input

Mode:
Platform Monitor Configuration

Example:

Your Product# configure terminal
Your Product(config)# dry-contact
Your Product(dry-contact)# set dry-contact 1 state enable interval 100 name Input1Active normalstate close

Display Commands

This section includes Platform Monitor display commands.

show platform-monitor

Command Objective:
This command displays Platform information.

Syntax:
show platform-monitor { cpu | cpuload | memory | fs | psu | fan | temp}

Parameter Description:

• cpu - CPU usage
• cpuload - CPU load average
• memory - Memory usage
• fs - File System usage
• psu - Power Supply
• fan - Fan
• temp - Temperature

Mode:
Privileged EXEC Mode

Example:

Your Product# show platform-monitor cpu

CPU used : 9%

show platform-monitor dry-contact configuration | status

Command Objective:
This command displays dry-contact configuration and status information.

Syntax:
show platform-monitor dry-contact {configuration | status}

Parameter Description:

• dry-contact - The dry-contact probe
• configuration | status - Configuration|Status of the dry-contact input

Displayed Parameters Description:

• Input #< id > - The dry-contact input id <1|2>
• Operational state : Enable|Disable - The dry-contact input operational state
• Normal input state : Opened|Closed - Normal state of the dry-contact input
• Interval < 100-1000 > msec - Interval at which the probe will collect data. From 100 to 1000 milliseconds.
• Name <1-127 characters> - The dry-contact input name
• Input pin state : Opened|Closed - Input pin state of the dry-contact

Mode:
Privileged EXEC Mode

Example:

Your Product# show platform-monitor dry-contact status

Dry contact input status:
  Input #1 :
     Operational state     : Enabled
     Normal input state    : Closed
     Input pin state       : Opened
  Input #2 :
     Operational state     : Disabled
     Normal input state    : ---
     Input pin state       : ---

Your Product# show platform-monitor dry-contact configuration

Dry contact input configuration:
  Input #1 :
     Operational state    : Enabled
     Normal input state   : Closed
     Interval             : 100 msec
     Name                 : Input1Active
  Input #2 :
     Operational state    : Disabled
     Normal input state   : Opened
     Interval             : 1000 msec
     Name                 : Input2Active

show platform-monitor transceiver

Command Objective:
This command lists transceivers connected on the unit's ports and provides high-level information for the following:

• Type
• Vendor name
• Part number
• Serial number

Syntax:
show platform-monitor transceiver

Mode:
Privileged EXEC Mode

Example:

Your Product# show platform-monitor transceiver

--------------------------------------------------------------------------------
Port     Type                 Vendor           Part             Serial          
                              Name             Number           Number          
--------------------------------------------------------------------------------
1        100GBASE-CR4         FS               Q28-PC01         G2006502622-2   
2        100GBASE-SR4         Accedian         7QM-000          L2102090233     
3        100GBASE-LR4         Accedian         7QN-000          L2011190077     
4        100GBASE-ER4         Accedian         7QP-000          L2106250012     
AUX      100G SWDM4           Gigalight        7SM-400          M110803029

show platform-monitor transceiver [port]

Command Objective:
This command provides further information for each transceiver that is set port ID: 1 to 4 or AUX (as labeled on the product's front panel):

• Temperature (C)
• Supply Voltage (V)
• Tx Bias Current (mA)
• Tx Output Power (dBm)
• Rx Optical Pwr (dBm)
• Type
• Vendor name
• Part number
• Serial number

Syntax:
show platform-monitor transceiver [port]

Parameter Description:

• port - 1 to 4 or AUX (as labeled on the product's front panel)

Mode:
Privileged EXEC Mode

Example:

Your Product# show platform-monitor transceiver 2

Transceiver in 2
Identifier : QSFP28
Transceiver Type : 100GBASE-SR4
Connector Type : MPO 1x12
Wavelength : 850nm
Encoding : 64B/66B
Signaling Rate : 25500 MBd
Transfer Distance : 70m (OM3), 100m (OM4)
Vendor Name : Accedian
Vendor OUI : 00:24:FD
Vendor PN : 7QM-000
Vendor Rev : S1
Vendor SN : L2102090233
Date Code (yy-mm-dd) : 21-02-09
Diagnostic Support : Yes
SFP memory (Location : A0H)
===============================================================================
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
000: 11 DC 0C 80 00 00 00 40 20 02 00 05 FF 00 00 23 * .......@ ......# *
016: 00 00 32 00 41 63 63 65 64 69 61 6E 20 20 20 20 * ..2.Accedian *
032: 20 20 20 20 00 00 24 FD 37 51 4D 2D 30 30 30 20 * ..$.7QM-000 *
048: 20 20 20 20 20 20 20 20 53 31 42 68 07 D0 46 5A * S1Bh..FZ *
064: 02 00 30 9A 4C 32 31 30 32 30 39 30 32 33 33 20 * ..0.L2102090233 *
080: 20 20 20 20 32 31 30 32 30 39 20 20 0C 00 67 8F * 210209 ..g. *
096: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * ................ *
112: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * ................ *
===============================================================================
Transceiver Digital Diagnostic Monitoring (DDM)
===============================================================================
Value Low Alarm Low Warn High Warn High Alarm
-------------------------------------------------------------------------------
Temperature (C) 29.31 0.00 5.00 65.00 70.00
Supply Voltage (V) 3.30 2.90 3.00 3.50 3.60
===============================================================================
Transceiver Lane Digital Diagnostic Monitoring (DDM)
===============================================================================
Low Alarm Low Warn High Warn High Alarm
-------------------------------------------------------------------------------
Lane Tx Bias Current (mA) 2.00 3.00 13.00 14.00
Lane Tx Output Power (dBm) -9.40 -8.40 2.40 3.40
Lane Rx Optical Pwr (dBm) -11.00 -10.60 2.40 3.40
-------------------------------------------------------------------------------
Lane ID Tx Bias(mA) Tx Pwr(dBm) Rx Pwr(dBm)
-------------------------------------------------------------------------------
1 7.00 -0.18 -1.35
2 7.00 0.05 0.17
3 7.00 0.37 0.01
4 7.00 0.13 0.40
===============================================================================