.svg?sv=2022-11-02&spr=https&st=2024-11-22T12%3A42%3A39Z&se=2024-11-22T12%3A52%3A39Z&sr=c&sp=r&sig=BDfSaSfmFDjdAAqd3K2rfOBbgUcGUK62%2BcN1V%2Fjijdg%3D){kind=logo}
Viewing Synthetic Loss Measurement Results
- 04 Nov 2024
- 2 Minutes to read
- Contributors
- Print
- PDF
Viewing Synthetic Loss Measurement Results
- Updated on 04 Nov 2024
- 2 Minutes to read
- Contributors
- Print
- PDF
Article summary
Did you find this summary helpful?
Thank you for your feedback
To view synthetic loss measurement results details
Access the page SOAM ▶ CFM ▶ SLM ▶ Results.
A summary of results for all SLM instances is displayed.Click the Index of the SLM instance for which you want to view the synthetic loss measurements.
For more information on specific parameters, refer to the following table.
SLM Results (SOAM ▶ CFM ▶ SLM ▶ Results)
| Parameter | Description |
|---|---|
| Index | The index of the SLM instance |
| Name | The name of the SLM instance |
| MEP Index | The index assigned with the Maintenance association End Point |
| MEPID | The local Maintenance association End Point Identifier |
| Remote MEPID R-MEPID | The remote Maintenance association End Point Identifier. |
| Priority | The priority value to be used in VLAN tags, if present, in the transmitted frame |
| Period | The number of periods that have elapsed since measurement started The previous period is indicated in Period Time. Continuous Results in the section below gives the packet loss since the last time the statistics were cleared. |
| Period Time | The time when the current period results were moved to the previous period results |
| A Near-End Alarm | The state of the near-end SLM alarm |
| A Far-End Alarm | The state of the far-end SLM alarm |
| SLM Sent | The number of synthetic loss messages sent |
| SLR Received | The number of synthetic loss replies received |
| Remote SLM Received | The number of synthetic loss messages received by the remote MEP |
| Near-End Packets Lost | The number of packets lost at the near end |
| Far-End Packets Lost | The number of packets lost at the far end |
| Near-End Pkt-Loss Ratio NE Loss % | Near-end loss ratio The ratio of packets lost in a near-end network |
| Far-End Pkt-Loss Ratio FE Loss % | Far-end loss ratio The ratio of packets lost in a far-end network |
| Number of Gaps Nbr Gaps | The total number of gaps that have been detected from the sequence of packets that were received during the interval Note: This counter is reset to zero at the beginning of each period. |
| Largest Gap Size Largest Gap | The longest uninterrupted sequence of missing packets that was detected during the period. Expressed in packets Note: This counter is reset to zero at the beginning of each period. |
| Operational Status | The SLM operational status code. Valid values are:
|
© 2024 Cisco and/or its affiliates. All rights reserved.
For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms
For legal information about Accedian Skylight products, please visit: Accedian legal terms and tradmarks
Was this article helpful?