Viewing SyncE/ESMC Port Statistics

Updated on 14 Apr 2022
5 Minutes to read
Contributors

Article summary

Did you find this summary helpful?

Thank you for your feedback

If your equipment has this optional hardware feature, you can view a summary and/or detailed SyncE/ESMC port statistics for each port.

To view a summary of SyncE/ESMC statistics for all ports

Access the page Port ▶SyncE.
Ensure that the option ESMC QL Mode is selected.
Summary statistics and the port status for all ports are displayed in the SyncE/ESMC Port Statistics Summary section at the bottom of the page.
To view detailed SyncE/ESMC statistics for a port, select its name from the list.
For more information on specific parameters, refer to the following table.

SyncE/ESMC Port Statistics (Port ▶SyncE)

Parameter	Description
Current QL to Clock Selection Process	The current QL (Quality Level) used for the clock selection process with the time elapsed in seconds (with millisecond resolution) since the last change occurred.
Last QL Received	Indicates the last QL received on the port with the time elapsed in seconds (with millisecond resolution) since it was last received.
Last QL Sent	Indicates the last QL sent to the port with the time elapsed in seconds (with millisecond resolution) since it was last sent.
Wait-to-restore Remaining	Indicates the remaining wait-to-restore period, expressed in seconds.
Minimum QL Received Inter- Arrival Time	Indicates the minimum time between any two consecutively received QL for ESMC PDU of type informational.
Maximum QL Received Inter- Arrival Time	Indicates the maximum time between any two consecutively received QL for ESMC PDU of type informational.
Averaged QL Received Inter- Arrival Time	Indicates the averaged time between any two consecutively received QL for ESMC PDU of type informational
Count of ESMC PDU Received	Indicates the number of ESMC PDU that have been received.
Count of ESMC PDU Malformed Received	Indicates the number of ESMC PDU Malformed that have been received.
Count of ESMC PDU of Type Event Received	Indicates the number of ESMC PDU that have been received with the type event (event flag set to 1).
Count of ESMC PDU Received with Valid QL and Extended TLVs	Indicates the number of ESMC PDU that have been received with valid QL and extended TLVs.
Count of ESMC PDU Received with QL-STU/UNK	Indicates the number of ESMC PDU that have been received with the Quality Level STU/UNK: (Option 2) QL-STU: Synchronized – Traceability unknown. (Option 3) QL-UNK: This synchronization trail transports a timing quality generated by an unknown clock source. It is at least of quality SSU.
Count of ESMC PDU Received with QL-PRS	Indicates the number of ESMC PDU that have been received with the Quality Level PRS: (Option 1) QL-PRS: Primary reference source traceable [ITU-T G.811].
Count of ESMC PDU Received with QL-PRC	Indicates the number of ESMC PDU that have been received with the Quality Level PRC: (Option 1) QL-PRC: This synchronization trail transports a timing quality generated by a primary reference clock that is defined in [ITU-T G.811].
Count of ESMC PDU Received with QL-INV3	Indicates the number of ESMC PDU that have been received with* Quality Level Invalid Code 3*.
Count of ESMC PDU Received with QL-SSU-A/TNC	Indicates the number of ESMC PDU that have been received with the Quality Level SSU-A/TNC: (Option 1) QL-SSU-A: This synchronization trail transports a timing quality generated by a type I or V slave clock that is defined in [ITU-T G.812]. (Option 2) QL-TNC: Traceable to transit node clock ([ITU-T G.812], type V).
Count of ESMC PDU Received with QL-INV5	Indicates the number of ESMC PDU that have been received with Quality Level Invalid Code 5.
Count of ESMC PDU Received with QL-INV6	Indicates the number of ESMC PDU received with Quality Level Invalid Code 6.
Count of ESMC PDU Received with QL-ST2	Indicates the number of ESMC PDU that have been received with the Quality Level ST2: (Option 2) QL-ST2: Traceable to stratum 2 (ITU-T G.812], type V).
Count of ESMC PDU Received with QL-SSU-B	Indicates the number of ESMC PDU that have been received with the Quality Level SSU-B: (Option 1) QL-SSU-B: This synchronization trail transports a timing quality generated by a type VI slave clock that is defined in [ITU-T G.812].
Count of ESMC PDU Received with QL-INV9	Indicates the number of ESMC PDU that have been received with Quality Level Invalid Code 9.
Count of ESMC PDU Received with QL-EEC2/ST3	Indicates the number of ESMC PDU that have been received with the Quality Level EEC2/ST3: (G.8264) QL-EEC2: Synchronous Ethernet equipment clock option 2. This clock option is treated like an ITU-T G.812 type IV clock [i.e. QL-SEC and QL-ST3, respectively]). (Option 2) QL-ST3: Traceable to stratum 3 ([ITU-T G.812], type IV).
Count of ESMC PDU Received with QL-EEC1/SEC	Indicates the number of ESMC PDU that have been received with the Quality Level EEC1/SEC: (G.8264) QL-EEC2: Synchronous Ethernet equipment clock option 1 (is treated as a ITU-T G.813 option 1). (Option 3) QL-SEC: This synchronization trail transports a timing quality generated by a synchronous equipment clock (SEC) that is defined in [ITU-T G.813] or [ITU-T G.8262], option I.
Count of ESMC PDU Received with QL-SMC	Indicates the number of ESMC PDU that have been received with the Quality Level SMC: (Option 2) QL-SMC: Traceable to SONET clock self-timed ([ITU-T G.813] or [ITU-T G.8262], option II).
Count of ESMC PDU Received with QL-ST3E	Indicates the number of ESMC PDU that have been received with the Quality Level ST3E: (Option 2) QL-ST3E: Traceable to stratum 3 ([ITU-T G.812], typeIV)
Count of ESMC PDU Received with QL-PROV	Indicates the number of ESMC PDU that have been received with the Quality Level PROV: (Option 2) QL-PROV: Provisionable by the network operator.)
Count of ESMC PDU Received with QL-DNU-DUS	Indicates the number of ESMC PDU that have been received with the Quality Level DNU-DUS: (Option 1) QL-DNU: This signal should not be used for synchronization. (Option 2) QL-DUS: This signal should not be used for synchronization.
Count of ESMC PDU Sent	Indicates the number of ESMC PDU that have been sent.
Count of ESMC PDU of Type Event Sent	Indicates the number of ESMC PDU that have been sent with the type event (event flag set to 1).
Count of ESMC PDU Sent with Extended TLVs	Indicates the number of ESMC PDU that have been sent with extended TLV forwarded.
Count of ESMC Failure Detection	Indicates the number of times an ESMC failure was detected (no QL for five-second timeout).
Count of Signal Failure Detection	Indicates the number of times a signal failure was detected.

© 2024 Cisco and/or its affiliates. All rights reserved.

For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms
For legal information about Accedian Skylight products, please visit: Accedian legal terms and tradmarks

Was this article helpful?

What's Next

Configuring Traffic