.svg?sv=2022-11-02&spr=https&st=2024-11-07T23%3A43%3A02Z&se=2024-11-07T23%3A53%3A02Z&sr=c&sp=r&sig=BFkiCG%2B9UE7Y90YPgyMNfuuh4HI0iBrGXwJci1nJqjM%3D){kind=logo}
Viewing SFP Information
- 25 Jan 2024
- 5 Minutes to read
- Contributors
- Print
- PDF
Viewing SFP Information
- Updated on 25 Jan 2024
- 5 Minutes to read
- Contributors
- Print
- PDF
Article summary
Did you find this summary helpful?
Thank you for your feedback
Use this page to view both summary and detailed information about all currently-detected SFPs.
To view a configuration summary of all SFPs
- Access the page Port ▶SFP ▶Configuration.
A listing all SFPs currently detected by the unit is displayed, along with their status and speed.
To view detailed configuration information for a specific SFP
Access the page Port ▶SFP ▶Configuration.
A listing all SFPs currently detected by the unit is displayed, along with their status and speed.In the Connector column of the table, click the SFP for which you want to view detailed information.
For more information on specific parameters, refer to the following tables.
SFP Information (Port ▶SFP ▶Configuration)
| Parameter | Description |
|---|---|
| Present | An indication of whether or not the SFP is present. Available options are:
|
| Connector | The physical connector the port is using. |
| Part Number | The manufacturer’s part number or product name. |
| Serial Number | The manufacturer’s serial number for the transceiver. |
| Wavelength | The nominal transmitter wavelength at room temperature, expressed in nanometers. |
| Speed | The speed supported by the SFP, such as 1 Gbps or 10 Gbps. |
To view a status summary of all SFPs
- Access the page Port ▶SFP ▶Status.
Summary information for all SFPs currently detected by the unit is displayed.
For more information on specific parameters, refer to the following tables.
To view detailed status information for a specific SFP
Access the page Port ▶SFP ▶Status.
Summary information for all SFPs currently detected by the unit is displayed.In the Connector column of the table, click the SFP for which you want to view detailed information.
The details pertaining to the selected SFP are displayed. The level of detail provided may vary, depending on the SFP's state.
For more information on specific parameters, refer to the following tables.
SFP Status Information (Port ▶SFP ▶Status ▶[connector])
SFP or Fiber Information
| Parameter | Description |
|---|---|
| Connector Type | The external cable connector provided as the media interface. |
| Vendor | The manufacturer name. This is a 16-character field that contains ASCII characters, padded on the right with ASCII spaces (20h). |
| Wave Length | Indicates the nominal transmitter wavelength at room temperature, expressed in nanometers. |
| Part Number | The manufacturer part number or product name. This is a 16-byte field that contains ASCII characters, padded on the right with ASCII spaces (20h). |
| Serial Number | The manufacturer serial number for the transceiver. This is a 16-character field that contains ASCII characters, padded on the right with ASCII spaces (20h). |
| Revision | The manufacturer’s product revision This is a 16-character field that contains ASCII characters, padded on the right with ASCII spaces (20h). |
| SFP Present | Indicates the presence of a recognized SFP. |
| Diagnostics | Supported or unsupported . A value of supported indicates that diagnostic information is provided in the SFP memory section. |
| Calibration |
|
| Thresholds | Indicates whether alarm and warning thresholds are supported. |
| Speed | The speed supported by the SFP, such as 1 Gbps . Two values are displayed:
|
Monitoring Information
| Parameter | Description |
|---|---|
| Temperature | Transceiver temperature, measured internally. Temperature accuracy is manufacturer-specific, but must be higher than 3 degrees Celsius for the specified operating temperature and voltage. |
| Laser Bias Current | Coupled TX output power, measured internally. Accuracy is manufacturer-specific but must be better than 3 dB for the specified operating temperature and voltage. Data is assumed to be based on measurement of a laser monitor photodiode current. Data is not valid when the transmitter is disabled. |
| Transmit Power | Coupled TX output power, measured internally. Accuracy is manufacturer-specific but must be better than 3 dB for the specified operating temperature and voltage. Data is assumed to be based on measurement of a laser monitor photodiode current. Data is not valid when the transmitter is disabled. |
| Receive Power | Received optical power, measured internally. Accuracy depends on the exact optical wavelength. For the manufacturer’s specified wavelength, accuracy should be better than 3 dB for the specified temperature and voltage. This accuracy should be maintained for input power levels up to the lesser of maximum transmitted or maximum received optical power per the appropriate standard. It should be maintained down to the minimum transmitted power minus cable plant loss (insertion loss or passive loss) per the appropriate standard. Accuracy beyond this minimum required received input optical power range is manufacturer specific. |
| Supply Voltage | Transceiver supply voltage, measured internally. Note: Transmitter supply voltage and receiver supply voltage are isolated in some transceivers. In that case, only one supply is monitored. Refer to the device specifications for details. |
SFP Thresholds
| Parameter | Description |
|---|---|
| Temperature | High Alarm: High-temperature alarm for the transceiver Low Alarm: Low-temperature alarm for the transceiver High Warning: High-temperature warning for the transceiver Low Warning: Low-temperature warning for the transceiver |
| Vcc | High Alarm: High-supply voltage alarm for the transceiver Low Alarm: Low-supply voltage alarm for the transceiver High Warning: High-supply voltage warning for the transceiver Low Warning: Low-supply voltage warning for the transceiver |
| Laser Bias Current | High Alarm: High-laser bias current alarm for the TX, expressed in microamperes Low Alarm: Low-laser bias current alarm for the TX, expressed in microamperes High Warning: High-laser bias current warning for the TX, expressed in microamperes Low Warning: Low-laser bias current warning for the TX, expressed in microamperes |
| Tx Power | High Alarm: High-output power alarm for the TX (~ -40 dBm to +8.2 dBm) Low Alarm: Low-output power alarm for the TX (~ -40 dBm to +8.2 dBm) High Warning: High-output power warning for the TX (~ -40 dBm to +8.2 dBm) Low Warning: Low-output power warning for the TX (~ -40 dBm to +8.2 dBm) |
| Rx Power | High Alarm: High-input power alarm for the RX (~ -40 dBm to +8.2 dBm) Low Alarm: Low-input power alarm for the RX (~ -40 dBm to +8.2 dBm) High Warning: High-input power warning for the RX (~ -40 dBm to +8.2 dBm) Low Warning: Low-input power warning for the RX (~ -40 dBm to +8.2 dBm) |
SFP Memory Information
- SFP Memory (Location: A0h)
The SFP memory field provides a hexadecimal dump of the digital diagnostic memory map at address A0h. Refer to SFF-8472 for detailed descriptions of the individual data fields. - Monitor Memory (Location: A2h)
The Monitor memory field provides a hexadecimal dump of the digital diagnostic memory map at address A2h. Refer to SFF-8472 for detailed descriptions of the individual data fields. - Copper PHY Config Memory (Location: ACh or A2h)
The Copper PHY config memory field provides a hexadecimal dump of the PHY memory map at address ACh. Refer to the copper SFP vendor's specification for detailed descriptions of the individual data fields.
© 2024 Cisco and/or its affiliates. All rights reserved.
For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms
For legal information about Accedian Skylight products, please visit: Accedian legal terms and tradmarks
Was this article helpful?