.svg?sv=2022-11-02&spr=https&st=2024-12-23T05%3A40%3A07Z&se=2024-12-23T05%3A50%3A07Z&sr=c&sp=r&sig=RCo0fE4DiRIuQ9INwmYz0J6LDL3yw4%2BSZbcYDgTKmW4%3D){kind=logo}
Viewing RFC-2544 Test Results
- 19 Sep 2024
- 3 Minutes to read
- Contributors
- Print
- PDF
Viewing RFC-2544 Test Results
- Updated on 19 Sep 2024
- 3 Minutes to read
- Contributors
- Print
- PDF
Article summary
Did you find this summary helpful?
Thank you for your feedback
You can view the results for all tests being run by Legacy orchestrator. The test reports are saved on the Legacy orchestrator server.
To view RFC-2544 test results
Access the Service Performance ▶ RFC-2544 ▶ Results page to view the list of all tests currently being executed by Legacy orchestrator.
For more information on specific parameters, see the following table.
RFC-2544 Tests Result List (RFC-2544 ▶ Results)
| Parameter | Description |
|---|---|
| Test name | The name of the test suite. A maximum of one test suite can be created per device. |
| Description | A short description used to help identify the report. |
| Source device name | Name of the source device for this test. |
| Operator | Name of the user who executed the test suite. |
| Status | State of execution of the test suite. Possible values:
|
| Start time | The timestamp indicating when the test began. |
| End time | The timestamp indicating when the test ended. |
| Force delete | Select this option to ensure the immediate removal of any test configurations that were deleted locally. Will not wait for the next synchronization process to complete. If a test configuration is deleted directly from a device (using the web interface or a CLI command on the device itself), a subsequent request on Legacy orchestrator to delete this test configuration will result in an error message stating that the test is not present on the device. In the event of such an error, Legacy orchestrator will leave the test configuration in its database. Legacy orchestrator will detect the deletion of the test configuration on the device during its normal synchronization process. Then it will synchronize its data store to remove the configuration from its inventory. However, if you want to force this test to be deleted immediately, simply select the Force delete option. |
Viewing Detailed RFC-2544 Test Results
The detailed results of an RFC-2544 test are stored in a file. The results of tests being run through Vision SP are sent to the Legacy orchestrator server when the test is completed. When Legacy orchestrator retrieves the file, it is automatically deleted from the device.
To display the detailed results of an RFC-2544 test
Access the page RFC-2544 ▶ Results.
Select a test result. You may select several test results by clicking and pressing down on the Ctrl or the Shift key on your keyboard.
Click the Show RFC-2544 Test Report button.
If more than one test was selected, subsequent reports are appended in the RFC-2544 Test Report dialog.From this dialog, you can export the report by clicking the Export button.
Exporting RFC-2544 Test Results
You can export the detailed results of an RFC-2544 test to a TXT or PDF file.
To export the detailed results of an RFC-2544 test
Access the page RFC-2544 ▶ Results.
Select a test result. You may select several test results by clicking and pressing on the
Ctrl or Shift key on your keyboard.Click the Export RFC-2544 Report
button.Select the desired export format: PDF or Text.
Click the Export button.
A dialog pops allowing you to save the file.
Save the file under the name and location of your choice.
button.Test Summary Dashboard
The test summary dashboard gives you a high-level statistical view of the RFC-2544 test status, test duration, and finished tests. The dashboard is displayed on the bottom of the Results page. Clicking on the text summaries will create a filter on the grid.
Notes:
Text summaries have replaced pie charts as of Legacy orchestrator 23.12.
The Test status and Finished test filter is the same as operationalState and lastUpdate chart in Devices tab of Managed Elements.
The Test duration chart filter has two fields representing a time range in hours. Each field will receive a number from 0 to 24, meaning 0 hour to 24 hours. Fields must be in ascending order.
The dashboard provides you with the following statistics:
| Type | Text Summary | Details |
|---|---|---|
| Test status |  | Displays the status of the tests, in percentages. Status includes:
|
| Test duration |  | Displays the duration of tests, in percentages. Duration includes:
|
| Finished test |  | Displays the tests that have finished, in percentages. Finished time includes:
|
© 2024 Cisco and/or its affiliates. All rights reserved.
For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms
For legal information about Accedian Skylight products, please visit: Accedian legal terms and tradmarks
Was this article helpful?