Upgrading the Module Dock Device Firmware

New firmware versions typically provide new and/or enhanced features. It is recommended to only perform firmware updates in accordance with instructions per Technical Support.

To verify the current firmware version running on the Cisco® Provider Connectivity Assurance Module Dock (formerly Skylight module dock) device, refer to the Current Version field in the Firmware Maintenance section of the AMD System ▶ Firmware page.

You can upgrade the firmware used by the Module Dock by downloading the firmware file directly from your computer.

▶ To upgrade the Module Dock device's firmware

1. Access the page AMD System ▶ Firmware.

2. Click the Browse button located next to the New Firmware field.

3. In the dialog box that appears, select the firmware file on your computer, then click OK.

Note: The firmware is distributed in a binary file with the filename extension .afl.

4. Click the Upgrade button.

Once the firmware has been loaded, the device will restart in order to activate the new firmware.

▶ To revert to the previous software version

CAUTION: Reverting to an older firmware version is advisable ONLY through the Rollback feature. With Rollback, compatible configuration settings are loaded with the previous firmware.
A simple firmware downgrade is NOT advisable because the older firmware may not match the existing (newer) configuration.
Attempting a firmware downgrade using the Upgrade button may corrupt the device's configuration.

1. Access the page AMD System ▶ Firmware.

2. Ensure that the version number displayed in Rollback Version is the correct version to which to revert.

3. Click Rollback.

For more information on specific parameters, refer to the following table.

Firmware Parameters (AMD System ▶ Firmware)