Upgrading the module's Firmware

Updated on 04 Nov 2024
1 Minute to read
Contributors

Article summary

Did you find this summary helpful?

Thank you for your feedback

New firmware versions typically provide new and/or enhanced features, as well as defect corrections. It is recommended to only perform firmware updates in accordance with instructions per Technical Support.

To verify the current firmware version running on the (active) connected module, refer to the Current Version field of the Device Firmware Maintenance section of the Remote Device ▶ Firmware page.

Note: Status LEDs (presence indicators) are provided at the top of all pages of the Skylight module dock's Web interface. The LED associated with any connected device is always lit green, whether it is active or not.

You can upgrade the firmware used by the (active) connected Module by downloading the firmware file directly from your computer.

▶ To upgrade the module's firmware

Access the page Remote Device ▶ Firmware.
Click the Upgrade button located at the bottom of the page.
Once the firmware has been loaded, the device will restart in order to activate the new firmware. The restart requires at least 30 seconds to complete.

© 2024 Cisco and/or its affiliates. All rights reserved.

For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms
For legal information about Accedian Skylight products, please visit: Accedian legal terms and tradmarks

Was this article helpful?

What's Next

Managing Remote Device Feature Suites