Tracking the Progress of a Y.1564 Test

  • Updated on Oct 29, 2024
  • Published on Jul 28, 2021
  • 1 minute(s) read
  • Jonathan Poole
 Prev Next

You can track the progress of a test while it is running.

To track the progress of a Y.1564 test

  1. Access the Service Performance â–¶ Y.1564 â–¶ Results page.

  2. Select the test profile that you want to track.

  3. Click the Show Y.1564 Test Status button. The Y.1564 status summary window is displayed.

For more information on specific parameters, see the following table.

Y.1564 Status Summary (Y.1564 â–¶ Results)

Parameter Description
Service name The name of the Y.1564 service being tested.
25% CIR

50% CIR

75% CIR

100% CIR CIR+EIR

Policing Performance

 The current status of the test.

Possible values are:

  • PASS: This test passed the test criteria.
  • FAIL: This test failed the test criteria.
  • N/A: This test is not performed per the test configuration.
Committed Burst Size The maximum number of kibibytes available for a burst of frames that are sent at the port's speed and remain CIR conformant.
(CBS) Note: The burst size must be greater than the port's Maximum Transfer Unit (MTU).

© 2025 Cisco and/or its affiliates. All rights reserved.

For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms
For legal information about Accedian Skylight products, please visit: Accedian legal terms and trademarks