.svg?sv=2022-11-02&spr=https&st=2024-11-22T15%3A22%3A16Z&se=2024-11-22T15%3A32%3A16Z&sr=c&sp=r&sig=hFB0VMvyXbUeXoxQ1EC0uKd%2FItIZ4%2BGhwbyiYytThmQ%3D){kind=logo}
Skylight sensor: control SNMP Alarm Forwarding
- 04 Nov 2024
- 2 Minutes to read
- Contributors
- Print
- PDF
Skylight sensor: control SNMP Alarm Forwarding
- Updated on 04 Nov 2024
- 2 Minutes to read
- Contributors
- Print
- PDF
Article summary
Did you find this summary helpful?
Thank you for your feedback
Cisco Provider Connectivity Assurance Sensor Control can forward its alarm raise and alarm clear events as SNMP (v2 or v3) notification.
This article describes the structure of the MIB used in conjunction with these events.
MIB Structure
Sensor Control events are defined in the "ACD-ALM-MIB.mib" file. This MIB file defines two events that can be sent by Sensor Control, "acdAlarmActiveState" and "acdAlarmClearState".
acdAlarmActiveState
This is the SNMP trap that is generated when an alarm entry crosses its rising threshold and generates an event that is configured for sending SNMP traps. It contains the following bindings:
| Parameter | Description |
|---|---|
| acdAlarmCfgID | Unique value for each alarm |
| acdAlarmCfgNumber | The unique number identifying this alarm. This number is assigned by the Sensor Control and cannot be modified. This alarm number is composed of four fields, the remote device ID, the module number, the instance number and the error number. The format is DDDD.AA.BBBB.CC, where the parameters are as follows:
A module number is assigned for each alarm in the system. |
| acdAlarmCfgSeverity | Accedian classifies alarms into four severity types. These types and their associated decimal codes are: informational (0), minor (1), major (2) and critical (3). |
| acdAlarmCfgServiceAffecting | Indicates if the alarm is service affecting or not. This value depends on the utilization of the unit. For instance, in an application where monitoring of the traffic is mandatory, a link down event on the monitor port will be service affecting. |
| acdAlarmCfgDesc | Describes the alarm in a readable way, as an example: +5Vdc Power supply fail. |
| acdAlarmStatusLastChange | Time of the last change for this alarm. A value of zero means that nothing happened to this alarm since the last reboot. |
| acdAlarmCfgExtNumber | The unique number identifying this alarm. This number is assigned by the Sensor Control and cannot be modified. This alarm number is composed of four fields, the remote device ID, the module number, the instance number and the error number. The format is DDDD.AA.BBBB.CC, where the parameters are as follows:
A module number is assigned for each alarm in the system. |
| acdAlarmCfgConditionType | Alarm condition type |
| acdAlarmCfgAMOType | Alarm Maintenance Object type |
acdAlarmClearState
This is the SNMP trap that is generated when an alarm entry crosses its falling threshold and generates an event that is configured for sending SNMP traps. It contains the same bindings as acdAlarmActiveState.
© 2024 Cisco and/or its affiliates. All rights reserved.
For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms
For legal information about Accedian Skylight products, please visit: Accedian legal terms and tradmarks
Was this article helpful?