.svg?sv=2022-11-02&spr=https&st=2024-11-07T19%3A52%3A32Z&se=2024-11-07T20%3A02%3A32Z&sr=c&sp=r&sig=wH5RMoRLecROj%2BJNXyyEctQjMWyBjz5jnBN6BWr4vvA%3D){kind=logo}
Setting Up Virtual Connection Endpoints (VCEs)
- 07 Aug 2024
- 1 Minute to read
- Contributors
- Print
- PDF
Setting Up Virtual Connection Endpoints (VCEs)
- Updated on 07 Aug 2024
- 1 Minute to read
- Contributors
- Print
- PDF
Article summary
Did you find this summary helpful?
Thank you for your feedback
To view a summary of existing VCEs
- Access Virtual Connection ▶VCE ▶Configuration.
A list of all existing VCEs and their current status is displayed.
Note: A type Tunnel VCE will create an implicit VCA which can be included within another VCA. Also, a VCE with both TP A and TP Z ports configured as external will generate an implicit VCA.
For more information on specific parameters, refer to the following table.
VCE Configuration and Status (Virtual Connection ▶VCE ▶Configuration)
| Parameter | Description |
|---|---|
| VCE Name | A name that uniquely identifies the VCE on the Assurance Sensor LX-S (formerly Skylight element: LX-S). |
| TPID | The TPID (Tag Protocol Identifier). Specifies the type of VLANtagging used in the frames that will be handled by this VCE. Available tag protocol options are:
|
| TP A | The TP A is the Terminal Point interface. Can be:
|
| TP A VID | Used to indicate the VLANIDs expected for this VCE configuration. When Frame Type is 'all-to-one', this value is irrelevant, and '---' is displayed. |
| TP Z | The TP Z is the Terminal Point interface. Can be:
|
| TP Z VID | TP Z VID is applicable when 'vid-relay-action' is set to 'translate' or 'tag'. Only a single value for the VID may be specified. |
| Component ID | The ID of the Component into which the VCE will be attached. Specifying 0 indicates that the system shall automatically assign a component ID. |
To add a new VCE or edit an existing VCE
CAUTION: Before you can add a VCE to an assurance module, you must add a standard logical interface to it. For details, see "Configuring Logical Interfaces".
Access Virtual Connection ▶VCE ▶Configuration.
A list of all existing VCEs and their current status is displayed.Click Add to create a new VCE or click the Name of an existing VCE to edit its settings.
© 2024 Cisco and/or its affiliates. All rights reserved.
For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms
For legal information about Accedian Skylight products, please visit: Accedian legal terms and tradmarks
Was this article helpful?