Setting Up a Firmware Upgrade Configuration Job

  • Updated on Feb 14, 2025
  • Published on Jul 8, 2021
  • 3 minute(s) read
  • Jonathan Poole
 Prev Next

You can upgrade the firmware of devices from Legacy Orchestrator using a configuration job.

You can stage the new firmware version on the Legacy Orchestrator appliance before upgrading the firmware. "Managing Performance Element Firmware" for an explanation of how to stage a firmware version on Legacy Orchestrator.

Alternatively, you can specify the URL where the firmware file (to be used for the upgrade) can be obtained.

CAUTION: Performing a firmware upgrade will require a reboot on the unit. Rebooting a unit momentarily interrupts traffic and operations.

To set up a Firmware upgrade job

  1. Access the page Commission â–¶ Jobs.

  2. Set all common configuration job settings, as described in "Creating Configuration Jobs in GUI Mode" and "Creating Configuration Jobs Using Data Sets".

  3. Select FW upgrade in the left pane. The FW upgrade tab is displayed.
    Setting Up a Firmware Upgrade Configuration Job.png

  4. Complete all fields in the FW upgrade tab as required. For more information on specific parameters, see the table below.

  5. Click Apply, then click Close.
    Click the Refresh Button_Refresh_Generic.png button to refresh the user interface.

Note: On the Legacy Orchestrator Docker, FW upgrade configuration job is supported via SFTP only, and not FTP.

FW upgrade tab (Commission â–¶ Jobs)

General

Parameter Description
Firmware from EMS
  • True: Select True to choose a firmware file stored on Legacy Orchestrator. You will be able to choose from the firmware file stored on the system in the Firmware Load File field.
  • False: Select False to choose a firmware file from another location. You will be able to enter a URL for file in the Firmware Source URL field.
Type Firmware can be installed immediately (standard upgrade). Or it can be installed in a two-step process (download and activate). A configuration step can be used for a standard upgrade or for one step in a two-step upgrade.

Possible values:

  • Standard Upgrade - Installs the firmware on the unit and reboots the unit. This is the only option available for Provider Connectivity Assurance Sensor Modules.
  • Download - Downloads the firmware to the unit but does not install it.
  • Activate - Installs firmware (that was previously downloaded on the unit) and reboots the unit.

Firmware configuration (only enabled if Firmware from EMS is False)

Parameter Description
Filename This field is active when the Firmware from EMS field is set to True.

Allows you to select a firmware file from those stored on Legacy Orchestrator.

Note: This field is only available when the Firmware from EMS parameter is enabled.
Source URL This field is active when the Firmware from EMS field is set to False.

Allows you to enter a URL for a firmware file. Format:

sftp://username:password@host:port/subdir/load.afl
Type Select from the available options:​
  • PERFORMANCE_ELEMENT.
  • PERFORMANCE_MODULE - For a Assurance Sensor Module, the upgrade process will automatically place the Assurance Sensor Module Admin State to OOS before applying the upgrade. If you want your Assurance Sensor Modules to return to an Admin State of IS after the upgrade, you should add a Remote Device step to your configuration job that will set the Admin State to in service.
  • OTHER - Meant for firmware files that are not currently validated by Legacy Orchestrator. The firmware file can still be selected and used to perform an upgrade.
Version Firmware version. This value is filled in automatically when you select the firmware files to use for the upgrade.
Build number Build number of the firmware. This value is filled in automatically when you select the firmware files to use for the upgrade.

© 2025 Cisco and/or its affiliates. All rights reserved.
 
For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms
For legal information about Accedian Skylight products, please visit: Accedian legal terms and tradmarks