Rolling Back Firmware on Devices
  • 21 Jun 2024
  • 1 Minute to read
  • Contributors
  • PDF

Rolling Back Firmware on Devices

  • PDF

Article summary

When you upgrade the firmware of a device, the previous version of the firmware (the rollback version) is automatically saved and is available for installation if necessary.


CAUTION: Performing a firmware rollback requires a reboot of the device. Rebooting momentarily interrupts traffic and operation.

To roll back to the previous firmware version

  1. Access the Devices ▶ Firmware page.

  2. In the left pane, select the device name for which you wish to perform the firmware rollback.

  3. Click the Rollback firmware Button_Rollback_Firmware.png button.

  4. In the confirmation dialog, click OK to confirm and apply.
    A message indicating that the firmware rollback was launched successfully is displayed.

  5. Click OK.

© 2024 Cisco and/or its affiliates. All rights reserved.
 
For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms

For legal information about Accedian Skylight products, please visit: Accedian legal terms and tradmarks



Was this article helpful?

Changing your password will log you out immediately. Use the new password to log back in.
First name must have atleast 2 characters. Numbers and special characters are not allowed.
Last name must have atleast 1 characters. Numbers and special characters are not allowed.
Enter a valid email
Enter a valid password
Your profile has been successfully updated.