Recovering if the Primary Appliance Fails
  • 21 Jun 2024
  • 1 Minute to read
  • Contributors
  • PDF

Recovering if the Primary Appliance Fails

  • PDF

Article summary

If the primary Skylight orchestrator appliance is unavailable, service can be recovered by switching to the secondary appliance as explained in this section.

Restoring the Data Store on the Secondary Appliance

The first step is to restore the most recent backup of the data store (from the primary appliance) on the secondary appliance. Then you start the Skylight orchestrator software on the secondary appliance.

  1. Search for the latest backup that was transferred from the primary appliance to the secondary appliance:
    ls -l /data/backups

  2. Take note of the name of the latest backup file. You may want to write it down.

  3. Restore the latest backup.
    For example, if the latest backup file for the primary appliance is named:
    DBDUMP_2021-12-12_14:55:01.bkp.gz
    You would enter these two commands:
    cd /opt/accedian/skylight/scripts
    ./ems_restoredb_mysql.sh /data/backups/DBDUMP_2021-12-12_14:55:01.bkp.gz

  4. Using a console, log in to the secondary appliance as the visionems user.

  5. Start the Skylight orchestrator web interface on the secondary appliance as follows:
    service start app_server

Skylight orchestrator software should now be running on the secondary appliance.

Verifying the Switch to the Secondary Appliance

The final step is to verify the network inventory and ensure that the Skylight orchestrator web interface is operational on the secondary appliance.

  1. Using a supported web browser, log in to the Skylight orchestrator web interface on the secondary appliance.

  2. Click the logo (upper left corner of the page) to display the About Skylight orchestrator dialog and check that the BuildVersion is 21.08.

  3. Select the Devices ▶ Managed Elements page and verify that the total count of Skylight devices (bottom left corner of page) is accurate.

  4. Click the red dot.png icon (in bottom left corner) and verify that the current alarm count is accurate.

  5. Select the CommissionJobs page and verify that pre-existing configuration jobs are present.

  6. Select the CollectionReporting Status page and verify that:

  • The complete list of managed devices is displayed.

CSV time and Transfer time are both updated for all devices with performance data streaming enabled.

© 2024 Cisco and/or its affiliates. All rights reserved.
 
For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms

For legal information about Accedian Skylight products, please visit: Accedian legal terms and tradmarks



Was this article helpful?

Changing your password will log you out immediately. Use the new password to log back in.
First name must have atleast 2 characters. Numbers and special characters are not allowed.
Last name must have atleast 1 characters. Numbers and special characters are not allowed.
Enter a valid email
Enter a valid password
Your profile has been successfully updated.