Network Requirements — TCP/UDP Ports
  • 25 Sep 2024
  • 2 Minutes to read
  • Contributors
  • PDF

Network Requirements — TCP/UDP Ports

  • PDF

Article summary

Accedian devices, including the Cisco Provider Connectivity Assurance Sensor Control, use various Transmission Control Protocol (TCP) and User Datagram Protocol (UDP) ports for different services and applications.

The following table lists the TCP and UDP ports used by Cisco Provider Connectivity Assurance (formerly Accedian) demarcation devices. This information is useful for configuring firewalls on a network.

TCP/UDP Port Usage by Accedian Devices


Note: The indicated destination ports are the default values. You can use different values as needed.

ProtocolDestination PortService NameApplicationsDirection
TCP44240NFV TunnelNFV TunnelUser station to Device
TCP443HTTPSWeb InterfaceUser station to Device
TCP22SSHCommand Line Interface (CLI)User station to Device
TCP23TelnetCommand Line Interface (CLI)User station to Device
UDP161SNMPSNMP PollingServer to Device
TCP49TACACS+User authentication and authorizationDevice to Server
TCP14040Skylight Metrics CollectionPerformance Counters TransmissionDevice to Server
UDP162SNMPSNMP Trap SendingDevice to Server
UDP1812RADIUSUser authentication and authorizationDevice to Server
UDP514SyslogRemote SyslogDevice to Server
UDP123NTPNetwork Time Protocol SynchronizationDevice to Server
UDP320PTPPrecision Time Protocol SynchronizationDevice to master clock
TCP21FTPFile Transfers:
  • Configuration exports
  • Configuration imports
  • Firmware upgrades
  • SAT reporting
  • RFC-2544 report uploads
Device to Server; Server to Device
UDP69TFTPFile Transfers:
  • Configuration exports
  • Configuration imports
  • Firmware upgrades
  • SAT reporting
  • RFC-2544 report uploads
Device to Server; Server to Device
TCP990FTPSFile Transfers:
  • Configuration exports
  • Configuration imports
  • Firmware upgrades
Device to Server; Server to Device
TCP22SCPFile Transfers:
  • Configuration exports
  • Configuration imports
  • Firmware upgrades
Device to Server; Server to Device
TCP22SFTPFile Transfers:
  • Configuration exports
  • Configuration imports
  • Firmware upgrades
  • SAT reporting
  • RFC-2544 report uploads
Device to Server; Server to Device
TCP80HTTPFile Transfers:
  • Configuration exports
  • Configuration imports
  • Firmware upgrades
Device to Server
UDP862TWAMPTwo-Way Active Measurement ProtocolDevice to Server
UDP6000 (see note)TWAMPTwo-Way Active Measurement ProtocolDevice to Server
UDP8000 (see note)SATY.1564 One-Way Test CommunicationDevice to Device
UDP9000 (see note)SATY.1564 One-Way Test TrafficDevice to Device
UDP, TCP53DNSDomain Name SystemDevice to Server
UDP67DHCPAutomatic IP AssignmentDevice to Server
UDP68DHCPAutomatic IP AssignmentDevice to Server
UDP67Plug & GoLayer-3 BeaconDevice to Device
UDP68Plug & GoLayer-3 BeaconDevice to Device
UDP9065Plug & GoLayer-3 AdvertisementDevice to Device
UDP8793ControlManagement, configuration and reportingSensor Control to Provider Connectivity Assurance (formerly Skylight) modules

© 2024 Cisco and/or its affiliates. All rights reserved.
 
For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms

For legal information about Accedian Skylight products, please visit: Accedian legal terms and tradmarks



Was this article helpful?

Changing your password will log you out immediately. Use the new password to log back in.
First name must have atleast 2 characters. Numbers and special characters are not allowed.
Last name must have atleast 1 characters. Numbers and special characters are not allowed.
Enter a valid email
Enter a valid password
Your profile has been successfully updated.