Managing Traffic

Viewing a Summary of the Policy Configurations Use this page to view how the Cisco Provider Connectivity Assurance Sensor Control 's traffic policies have been configured. To view a summary of the policy configurations Access the pag...

Viewing a Summary of the VCA-VLAN Policy Configurations Use this page to view how the Cisco Provider Connectivity Assurance Sensor Control 's VCA VLAN traffic policies have been configured. To view a summary of the VCA-VLAN policy configura...

You can set up a specific filter (Layer-2, IPv4 or IPv6) for use with loopbacks, measuring bandwidth utilization per flow or traffic policies. By using such a filter, you can loop back traffic or set up a traffic policy based on specific characteris...

A CoS profile is used to map an input frame to a Layer-2 class of service based on the conformance level (Green/Yellow) of the incoming traffic and on the value of the following information of the incoming frames: PCP : p-bits in 802.1Q / 802.1...

Setting Up Bandwidth Utilization Per Flow Access the Traffic ▶ flowmeter ▶ Rules page to obtain the current report from the flowmeter, which is useful when determining bandwidth utilization on a per-flow basis. Bandwidth measurements for the var...

Setting the Working Rate You must select the layer (Layer 1 or Layer 2) used by the Cisco Provider Connectivity Assurance Sensor Control to determine the rate for the traffic generators and traffic regulators. For example, if you set up a traffi...

The flow broker is a flexible, remote packet capture solution that provides all-layer, end-to-end network visibility through efficient brokering, lossless delivery, and granular/shared filters. With the flow broker, you can perform Deep Packet Inspe...