.svg?sv=2022-11-02&spr=https&st=2024-09-24T06%3A34%3A59Z&se=2024-09-24T06%3A44%3A59Z&sr=c&sp=r&sig=HcdJ5VpKm5kq8gOCgD3SD%2B%2B0JdPNt5NyzuAmyd0zSWg%3D){kind=logo}
Managing the NETCONF Agent
- 09 Aug 2024
- 1 Minute to read
- Contributors
- Print
- PDF
Managing the NETCONF Agent
- Updated on 09 Aug 2024
- 1 Minute to read
- Contributors
- Print
- PDF
Article summary
Did you find this summary helpful?
Thank you for your feedback
You can configure a NETCONF agent so users with a NETCONF client can get or edit configuration and get notifications from the unit via the NETCONF protocol.
Note: Only NETCONF or SNMP (not both) can be enabled at the same time.
To enable the NETCONF agent
Access the page System ▶Agent ▶NETCONF.
Complete the required fields, then click Apply.
For more information on specific parameters, refer to the following table.
NETCONF Agent (System ▶Agent ▶NETCONF)
| Parameter | Description |
|---|---|
| Enable Agent | Check box to enable the unit's NETCONF agent. |
© 2024 Cisco and/or its affiliates. All rights reserved.
For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms
For legal information about Accedian Skylight products, please visit: Accedian legal terms and tradmarks
Was this article helpful?