.svg?sv=2022-11-02&spr=https&st=2024-11-22T15%3A08%3A05Z&se=2024-11-22T15%3A18%3A05Z&sr=c&sp=r&sig=%2BBleIkSqj2eq0X5fkGCCNLPFk2%2BJ8lxlEWMpLcNR2sY%3D){kind=logo}
Managing Syslog Messages
- 09 Aug 2024
- 2 Minutes to read
- Contributors
- Print
- PDF
Managing Syslog Messages
- Updated on 09 Aug 2024
- 2 Minutes to read
- Contributors
- Print
- PDF
Article summary
Did you find this summary helpful?
Thank you for your feedback
The unit logs information related to system operations as Syslog Messages. You can view the syslog messages directly in the Web management interface or send the log to a remote location such as a workstation.
Defining Syslog Parameters
To configure Syslog parameters
Access the page System ▶Agent ▶Syslog. A list of all syslog entries is displayed, with the most recent entry at the top.
You can update the log window with the most recent messages by clicking Refresh.Complete the required fields, then click Apply.
For more information on specific parameters, refer to the following table.
Syslog Configuration (System ▶Agent ▶Syslog)
Facility Configuration
| Parameter | Description |
|---|---|
| Device Facility | The device facility to log all messages using this user-defined facility instead of the default ones. |
Level Configuration
| Parameter | Description |
|---|---|
| Level Threshold | Configure the level threshold for syslog. All messages with a level greater than or equal to the selected one will be logged. For example, setting the priority threshold to DEBUG (lowest priority) causes all messages to be logged.
|
Remote Syslog Configuration
| Parameter | Description |
|---|---|
| Remote Syslog Enable | Check box to enable sending messages to a remote syslog server. When Remote Syslog is enabled, the following alarm is raised:Alarm ID: 8.0000.80 Severity: Major Service Affecting: No Description: Troubleshooting tool is running. Note: This alarm is raised when either a either a troubleshooting tool is running or the Remote Syslog feature is enabled. The alarm is cleared only when both (troubleshooting tool and Remote Syslog feature) are disabled. |
| Host | The IP address or domain name of the remote syslog server. |
Remote Level Configuration
| Parameter | Description |
|---|---|
| Level Threshold | Configure the level threshold for remote syslog. All messages with a level greater than or equal to the selected one will be logged. For example, setting the priority threshold to DEBUG (lowest priority) causes all messages to be logged. Available levels are:
|
Sending Syslog Messages to a Remote Location
You can configure the unit to send Syslog messages to a Syslog server in a remote location.
To send Syslog messages to a remote server
Access the page System ▶Agent ▶Syslog.
Complete the required fields, then click Apply.
For more information on specific parameters, refer to the table "Syslog Configuration (System ▶Agent ▶Syslog)".
© 2024 Cisco and/or its affiliates. All rights reserved.
For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms
For legal information about Accedian Skylight products, please visit: Accedian legal terms and tradmarks
Was this article helpful?