.svg?sv=2022-11-02&spr=https&st=2024-09-19T17%3A01%3A07Z&se=2024-09-19T17%3A11%3A07Z&sr=c&sp=r&sig=VIrGWtTKUpNJNdgrl9ptLoVito0KtrSSF8nGOyYF7Mw%3D){kind=logo}
Managing Device Firmware
- 20 Apr 2022
- 2 Minutes to read
- Contributors
- Print
- PDF
Managing Device Firmware
- Updated on 20 Apr 2022
- 2 Minutes to read
- Contributors
- Print
- PDF
Article summary
Did you find this summary helpful?
Thank you for your feedback
The firmware on Skylight devices is normally upgraded by means of configuration jobs or flows. When you set up a configuration job for a firmware upgrade, you can browse for a firmware file to install or you can access a firmware file that was previously stored (staged) on Skylight orchestrator.
The Devices ▶ Firmware page allows you to determine the version of firmware on all devices managed by Skylight orchestrator. You can also store and delete firmware files on the Skylight orchestrator server.
In particular, you can do the following tasks in the Devices ▶ Firmware page:
- View the list of Skylight devices, and determine the firmware version that is currently installed on each of them.
- Store firmware files for Skylight devices on the Skylight orchestrator appliance where they are readily available for upgrading devices remotely. It is possible to store the following:
- Firmware for most Skylight models
- Firmware for Skylight sensor: control
- Skylight sensor: control firmware suites (firmware for Skylight modules)
- Determine previous versions of firmware that are available for rolling back the firmware on each device.
- Delete firmware files from Skylight orchestrator appliance.
To view firmware installed on managed devices and stored on Skylight orchestrator
- Access the Devices ▶ Firmware page.
Devices ▶ Firmware page
Devices (left pane)
| Parameter | Description |
|---|---|
| Device name | The host name of the device. This value is set on the device. Skylight orchestrator obtains the value from the device. |
| Label | An identifier for the device that is defined and used in Skylight orchestrator. You can edit this by selecting the device in the Managed Elements list. |
| Serial | The serial number of the Skylight device. This value is obtained from the Skylight device. |
| IP | The IP address of the Skylight device. |
| Current firmware | The current firmware version that runs the Skylight device. |
| Rollback firmware | The firmware version available for a rollback. |
Firmware Files [stored on Skylight orchestrator] (right pane)
| Parameter | Description |
|---|---|
| Filename | Name of firmware file available on Skylight orchestrator, includes:
|
| Type | Type of device on which the firmware can be installed. Possible values:
|
| Version | Version of the firmware file or firmware suite file. |
| Build number | Build of the firmware file. |
| Supported products | Product numbers of devices on which the firmware can be installed. |
To store (stage) a new firmware version on Skylight orchestrator
Access the Devices ▶ Firmware page.
Click the Add firmware
button.Click the Choose File button.
Select the firmware file (afl format).
Click the Import FW Load button.
Click the Import button.
Click the Refresh
button to refresh the user interface. The new firmware file is added to the list.
button.
button to refresh the user interface. The new firmware file is added to the list.To delete a firmware file from Skylight orchestrator
Access the Devices ▶ Firmware page.
Select the firmware file (in the list) that you wish to delete.
Click the Remove firmware
button.Click OK from the confirmation dialog to confirm and apply.
button.© 2024 Cisco and/or its affiliates. All rights reserved.
For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms
For legal information about Accedian Skylight products, please visit: Accedian legal terms and tradmarks
Was this article helpful?