Managing Alarms and System Messages

The unit provides alarm functions to monitor and report on the status of the unit of the traffic performance and of other components. Setting General Alarms To set up general alarms Access the page System ▶Alarm ▶General . Complet...

To view the status of dry-contact-related alarms Access the page System ▶Alarm ▶Dry-Contact The dry-contact alarm status is displayed for each of the unit's inputs. For more information on specific parameters, refer to the following tab...

The unit logs information related to system operations as Syslog Messages. You can view the syslog messages directly in the Web management interface or send the log to a remote location such as a workstation. Defining Syslog Parameters To confi...

You can configure an SNMP agent so that it provides an interface to an SNMP-based management system (for get and set commands). The SNMP agent also allows the unit to send SNMP traps to a receiver. The receiver is usually used to monitor the conditi...

You can configure a NETCONF agent so users with a NETCONF client can get or edit configuration and get notifications from the unit via the NETCONF protocol. Note: Only NETCONF or SNMP (not both) can be enabled at the same time. To enable th...

You can manage the creation and transfer of history files, which are logs that contain statistics related to the services (for example, PAA, Regulator, Policy, CFM DMM, CFM PL, CFM SLM, Service Availability, Service Availability Metrics, TWAMP Gener...