List of Attributes That Will Affect Test ID

Updated on 13 Aug 2024
10 Minutes to read
Contributors

Article summary

Did you find this summary helpful?

Thank you for your feedback

The following list of attributes will change the SAT configuration ID for Provider Connectivity Assurance Sensor Control and Provider Connectivity Assurance Sensors.

Provider Connectivity Assurance Sensor Control

Y.1564

No.	Attribute	Description	Layer 2	Layer 3	Note
1	burstslaenable	Enable burst SLA test	No	No	Not applicable with Assurance Sensor Control
2	destinationport	Far-end UDP port	No	Yes*	Applicable when remoteunittype is layer-3
3	groupreversetests	Group reverse tests	No	Yes*	Applicable when remoteunittype is layer-3
4	sourceport	Near-end UDP port	No	Yes*	Applicable when remoteunittype is layer-3
5	timesyncmandatory	Device time SYNC mandatory	No	No	Applicable when Delay measurement type is one-way-delay
6	cbs	Committed Burst Size	No	No	Not applicable with Assurance Sensor Control. This is for future implementation only, default value is 0
7	ebs	Excess Burst Size	No	No	Not applicable with Assurance Sensor Control. This is for future implementation only, default value is 0
8	destinationip	Far-end IP	No	Yes*	Applicable when remoteunittype is layer-3
9	destinationmac	MAC destination	Yes*	No	Available when remoteunittype is layer-2, l2-accedian, l2-generic
10	incomingport	Incoming port	No	Yes*	Applicable when remoteunittype is layer-3
11	loopback	TW loopback	No	Yes*	Applicable when remoteunittype is layer-3
12	meglevel	Y.1731 MEG level	Yes*	No	Available when remoteunittype is layer-2 l2-accedian l2-generic
13	onewayreversepath	OW Reverse Path	No	Yes*	Applicable when remoteunittype is layer-3
14	ooopercentage	Out-of-order percentage (%)	Yes*	Yes*	Precondition: Assurance Sensor Control 20.11+
15	ooopercentageenable	Out-of-order percentage	Yes*	Yes*	Precondition: Assurance Sensor Control 20.11+
16	packetsize	Packet Size	Yes*	Yes*	Applicable when framesizetype is fixed
17	remoteunitdscp	DSCP	No	Yes*	Applicable when remoteunittype is layer-3
18	sequenceofsizes	Sequence of sizes	Yes*	Yes*	Applicable when framesizetype is EMIX
19	sourceip	Near-end IP	No	Yes*	Applicable when remoteunittype is layer-3
20	userpacketsize	User define	Yes*	Yes*	Applicable when framesizetype is EMIX
21	fedscpcheck	DSCP check	No	No	Not applicable with Assurance Sensor Control
22	fedscpunpreserve	DSCP unpreserve	No	No	Not applicable with Assurance Sensor Control
23	fedscpvalue	DSCP Value	No	No	Not applicable with Assurance Sensor Control
24	fenovlan1check	No VLAN1 check	No	No	Not applicable with Assurance Sensor Control
25	fenovlan2check	No VLAN2 check	No	No	Not applicable with Assurance Sensor Control
26	fevlan1deicheck	VLAN 1 DEI check	No	No	Not applicable with Assurance Sensor Control
27	fevlan1deiunpreserve	VLAN 1 DEI unpreserve	No	No	Not applicable with Assurance Sensor Control
28	fevlan1deivalue	VLAN 1 DEI Value	No	No	Not applicable with Assurance Sensor Control
29	fevlan1idcheck	VLAN 1 ID check	No	No	Not applicable with Assurance Sensor Control
30	fevlan1idunpreserve	VLAN 1 ID unpreserve	No	No	Not applicable with Assurance Sensor Control
31	fevlan1idvalue	VLAN 1 ID Value	No	No	Not applicable with Assurance Sensor Control
32	fevlan1pcpcheck	VLAN 1 PCP check	No	No	Not applicable with Assurance Sensor Control
33	fevlan1pcpunpreserve	VLAN 1 PCP unpreserve	No	No	Not applicable with Assurance Sensor Control
34	fevlan1pcpvalue	VLAN 1 PCP Value	No	No	Not applicable with Assurance Sensor Control
35	fevlan2deicheck	VLAN 2 DEI check	No	No	Not applicable with Assurance Sensor Control
36	fevlan2deiunpreserve	VLAN 2 DEI unpreserve	No	No	Not applicable with Assurance Sensor Control
37	fevlan2deivalue	VLAN 2 DEI Value	No	No	Not applicable with Assurance Sensor Control
38	fevlan2idcheck	VLAN 2 ID check	No	No	Not applicable with Assurance Sensor Control
39	fevlan2idunpreserve	VLAN 2 ID unpreserve	No	No	Not applicable with Assurance Sensor Control
40	fevlan2idvalue	VLAN 2 ID Value	No	No	Not applicable with Assurance Sensor Control
41	fevlan2pcpcheck	VLAN 2 PCP check	No	No	Not applicable with Assurance Sensor Control
42	fevlan2pcpunpreserve	VLAN 2 PCP unpreserve	No	No	Not applicable with Assurance Sensor Control
43	fevlan2pcpvalue	VLAN 2 PCP Value	No	No	Not applicable with Assurance Sensor Control

RFC 2544

No.	Attribute	Description	Layer 2	Layer 3	Note
1	destinationport	Far-end UDP port	No	Yes*	Applicable when peertype is l3-generic, layer-3
2	destinationmac	MAC destination	Yes*	Yes*	Applicable when peertype is layer-2, l2-accedian, l2-generic, l3-generic
3	meglevel	Y.1731 MEG level	Yes*	No	Applicable when peertype is layer-2, l2-accedian, l2-generic
4	b2bduration	Back to back Duration (ms)	Yes*	Yes*	Applicable when b2benable is true
5	b2bframesize	Back to Back Frame size	Yes*	Yes*	Applicable when b2benable is true
6	b2brepeat	Back to Back Repeat	Yes*	Yes*	Applicable when b2benable is true
7	delayduration	Delay Duration (s)	Yes*	Yes*	Applicable when delayenable is true
8	delayframeloss	Delay Frame loss (%)	Yes*	Yes*	Applicable when delayenable is true
9	delayframesize	Delay Frame size	Yes*	Yes*	Applicable when delayenable is true
10	flframesize	Frame loss Frame size	Yes*	Yes*	Applicable when framelossenable is true
11	flstepsize	Frame loss Step size	Yes*	Yes*	Applicable when framelossenable is true
12	l3twloopback	L3 two-way loopback	No	Yes*	Applicable when peertype is l3-generic, layer-3
13	peerdestinationip	Far-end IP	No	Yes*	Applicable when peertype is l3-generic, layer-3
14	peerdscp	DSCP	No	Yes*	Applicable when peertype is l3-generic, layer-3
15	peersourceip	Near-end IP	No	Yes*	Applicable when peertype is l3-generic
16	remoteunitport	Far-end device port	No	Yes*	Applicable when peertype is l3-generic, layer-3
17	sourceport	Near-end UDP port	No	Yes*	Applicable when peertype is l3-generic, layer-3
18	tptduration	Throughput Duration (s)	Yes*	Yes*	Applicable when tptenable is true
19	tptframeloss	Throughput Frame loss (0.1%)	Yes*	Yes*	Applicable when tptenable is true
20	tptframesize	Throughput Frame size	Yes*	Yes*	Applicable when tptenable is true
21	vlan1cfi	VLAN 1 CFI	Yes*	Yes*	Applicable when enablevlan1 is true
22	vlan1ethertype	VLAN 1 Ethertype	Yes*	Yes*	Applicable when enablevlan1 is true
23	vlan1id	VLAN 1 ID	Yes*	Yes*	Applicable when enablevlan1 is true
24	vlan1priority	VLAN 1 Priority	Yes*	Yes*	Applicable when enablevlan1 is true
25	vlan2cfi	VLAN 2 CFI	Yes*	Yes*	Applicable when enablevlan2 is true
26	vlan2ethertype	VLAN 2 Ethertype	Yes*	Yes*	Applicable when enablevlan2 is true
27	vlan2id	VLAN 2 ID	Yes*	Yes*	Applicable when enablevlan2 is true
28	vlan2priority	VLAN 2 Priority	Yes*	Yes*	Applicable when enablevlan2 is true

States

No: An attribute has to keep default values. If changing the attribute to anything other than the default value, the SAT configuration ID will be changed.

Yes*: An attribute can be modified with the condition mentioned in the Note column, otherwise the SAT Configuration ID will be changed.

Provider Connectivity Assurance Sensors

Y.1564

No.	Attribute	Description	Layer 2	Layer 3	Note
1	burstslaenable	Enable burst SLA test	Yes*	Yes*	Device version 7.8.1+
2	destinationport	Far-end UDP port	No	Yes*	Applicable when remoteunittype is layer-3
3	groupreversetests	Group reverse tests	No	Yes*	Applicable when remoteunittype is layer-3
4	sourceport	Near-end UDP port	No	Yes*	Applicable when remoteunittype is layer-3
5	timesyncmandatory	Device time SYNC mandatory	Yes*	Yes*	Applicable when Delay measurement type is one-way-delay
6	cbs	Committed Burst Size	Yes*	Yes*	Device version 7.8.1+
7	ebs	Excess Burst Size	No	No	Not applicable with Assurance Sensors. This is for future implementation only, default value is 8
8	destinationip	Far-end IP	No	Yes*	Applicable when remoteunittype is layer-3
9	destinationmac	MAC destination	Yes*	No	Available when remoteunittype is layer-2, l2-accedian, l2-generic
10	incomingport	Incoming port	No	Yes*	Applicable when remoteunittype is layer-3
11	loopback	TW loopback	No	Yes*	Applicable when remoteunittype is layer-3
12	meglevel	Y.1731 MEG level	Yes*	No	Available when remoteunittype is layer-2 l2-accedian l2-generic
13	onewayreversepath	OW Reverse Path	No	Yes*	Applicable when remoteunittype is layer-3
14	ooopercentage	Out-of-order percentage (%)	No	No	Not applicable with Assurance Sensors.
15	ooopercentageenable	Out-of-order percentage	No	No	Not applicable with Assurance Sensors.
16	packetsize	Packet Size	Yes*	Yes*	Applicable when framesizetype is fixed
17	remoteunitdscp	DSCP	No	Yes*	Applicable when remoteunittype is layer-3
18	sequenceofsizes	Sequence of sizes	Yes*	Yes*	Applicable when framesizetype is EMIX
19	sourceip	Near-end IP	No	Yes*	Applicable when remoteunittype is layer-3
20	userpacketsize	User define	Yes*	Yes*	Applicable when framesizetype is EMIX
21	fedscpcheck	DSCP check	No	Yes*	Applicable when delaymeasurementtype is one-way-delay
22	fedscpunpreserve	DSCP unpreserve	No	Yes*	Applicable when delaymeasurementtype is one-way-delay, fedscpcheck is true
23	fedscpvalue	DSCP Value	No	Yes*	Applicable when delaymeasurementtype is one-way-delay, fedscpcheck and fedscpunpreserve are true
24	fenovlan1check	No VLAN1 check	Yes*	Yes*	Applicable when delaymeasurementtype is one-way-delay
25	fenovlan2check	No VLAN2 check	Yes*	Yes*	Applicable when delaymeasurementtype is one-way-delay
26	fevlan1deicheck	VLAN 1 DEI check	Yes*	Yes*	Applicable when delaymeasurementtype is one-way-delay
27	fevlan1deiunpreserve	VLAN 1 DEI unpreserve	Yes*	Yes*	Applicable when delaymeasurementtype is one-way-delay, fevlan1deicheck is true
28	fevlan1deivalue	VLAN 1 DEI Value	Yes*	Yes*	Applicable when delaymeasurementtype is one-way-delay, fevlan1deicheck and fevlan1deiunpreserve are true
29	fevlan1idcheck	VLAN 1 ID check	Yes*	Yes*	Applicable when delaymeasurementtype is one-way-delay
30	fevlan1idunpreserve	VLAN 1 ID unpreserve	Yes*	Yes*	Applicable when delaymeasurementtype is one-way-delay, fevlan1idcheck is true
31	fevlan1idvalue	VLAN 1 ID Value	Yes*	Yes*	Applicable when delaymeasurementtype is one-way-delay, fevlan1idcheck and fevlan1idunpreserve are true
32	fevlan1pcpcheck	VLAN 1 PCP check	Yes*	Yes*	Applicable when delaymeasurementtype is one-way-delay
33	fevlan1pcpunpreserve	VLAN 1 PCP unpreserve	Yes*	Yes*	Applicable when delaymeasurementtype is one-way-delay, fevlan1pcpcheck is true
34	fevlan1pcpvalue	VLAN 1 PCP Value	Yes*	Yes*	Applicable when delaymeasurementtype is one-way-delay, fevlan1pcpcheck and fevlan1pcpunpreserve are true
35	fevlan2deicheck	VLAN 2 DEI check	Yes*	Yes*	Applicable when delaymeasurementtype is one-way-delay
36	fevlan2deiunpreserve	VLAN 2 DEI unpreserve	Yes*	Yes*	Applicable when delaymeasurementtype is one-way-delay, fevlan2deicheck is true
37	fevlan2deivalue	VLAN 2 DEI Value	Yes*	Yes*	Applicable when delaymeasurementtype is one-way-delay, fevlan2deicheck and fevlan2deiunpreserve are true
38	fevlan2idcheck	VLAN 2 ID check	Yes*	Yes*	Applicable when delaymeasurementtype is one-way-delay
39	fevlan2idunpreserve	VLAN 2 ID unpreserve	Yes*	Yes*	Applicable when delaymeasurementtype is one-way-delay, fevlan2idcheck is true
40	fevlan2idvalue	VLAN 2 ID Value	Yes*	Yes*	Applicable when delaymeasurementtype is one-way-delay, fevlan2idcheck and fevlan2idunpreserve are true
41	fevlan2pcpcheck	VLAN 2 PCP check	Yes*	Yes*	Applicable when delaymeasurementtype is one-way-delay
42	fevlan2pcpunpreserve	VLAN 2 PCP unpreserve	Yes*	Yes*	Applicable when delaymeasurementtype is one-way-delay, fevlan2pcpcheck is true
43	fevlan2pcpvalue	VLAN 2 PCP Value	Yes*	Yes*	Applicable when delaymeasurementtype is one-way-delay, fevlan2pcpcheck and fevlan2pcpunpreserve are true

RFC 2544

No.	Attribute	Description	Layer 2	Layer 3	Note
1	destinationport	Far-end UDP port	No	Yes*	Applicable when peertype is l3-generic, layer-3
2	destinationmac	MAC destination	Yes*	Yes*	Applicable when peertype is layer-2, l2-accedian, l2-generic, l3-generic
3	meglevel	Y.1731 MEG level	Yes*	No	Applicable when peertype is layer-2, l2-accedian, l2-generic
4	b2bduration	Back to back Duration (ms)	Yes*	Yes*	Applicable when b2benable is true
5	b2bframesize	Back to Back Frame size	Yes*	Yes*	Applicable when b2benable is true
6	b2brepeat	Back to Back Repeat	Yes*	Yes*	Applicable when b2benable is true
7	delayduration	Delay Duration (s)	Yes*	Yes*	Applicable when delayenable is true
8	delayframeloss	Delay Frame loss (%)	Yes*	Yes*	Applicable when delayenable is true
9	delayframesize	Delay Frame size	Yes*	Yes*	Applicable when delayenable is true
10	flframesize	Frame loss Frame size	Yes*	Yes*	Applicable when framelossenable is true
11	flstepsize	Frame loss Step size	Yes*	Yes*	Applicable when framelossenable is true
12	l3twloopback	L3 two-way loopback	No	Yes*	Applicable when peertype is l3-generic, layer-3
13	peerdestinationip	Far-end IP	No	Yes*	Applicable when peertype is l3-generic, layer-3
14	peerdscp	DSCP	No	Yes*	Applicable when peertype is l3-generic, layer-3
15	peersourceip	Near-end IP	No	Yes*	Applicable when peertype is l3-generic
16	remoteunitport	Far-end device port	No	Yes*	Applicable when peertype is l3-generic, layer-3
17	sourceport	Near-end UDP port	No	Yes*	Applicable when peertype is l3-generic, layer-3
18	tptduration	Throughput Duration (s)	Yes*	Yes*	Applicable when tptenable is true
19	tptframeloss	Throughput Frame loss (0.1%)	Yes*	Yes*	Applicable when tptenable is true
20	tptframesize	Throughput Frame size	Yes*	Yes*	Applicable when tptenable is true
21	vlan1cfi	VLAN 1 CFI	Yes*	Yes*	Applicable when enablevlan1 is true
22	vlan1ethertype	VLAN 1 Ethertype	Yes*	Yes*	Applicable when enablevlan1 is true
23	vlan1id	VLAN 1 ID	Yes*	Yes*	Applicable when enablevlan1 is true
24	vlan1priority	VLAN 1 Priority	Yes*	Yes*	Applicable when enablevlan1 is true
25	vlan2cfi	VLAN 2 CFI	Yes*	Yes*	Applicable when enablevlan2 is true
26	vlan2ethertype	VLAN 2 Ethertype	Yes*	Yes*	Applicable when enablevlan2 is true
27	vlan2id	VLAN 2 ID	Yes*	Yes*	Applicable when enablevlan2 is true
28	vlan2priority	VLAN 2 Priority	Yes*	Yes*	Applicable when enablevlan2 is true
29	excludevlansize	Exclude VLAN size	Yes*	Yes*	Device version 7.8+

States

No: An attribute has to keep default values. If changing the attribute to anything other than the default value, the SAT configuration ID will be changed.

Yes*: An attribute can be modified with the condition mentioned in the Note column, otherwise the SAT Configuration ID will be changed.

© 2024 Cisco and/or its affiliates. All rights reserved.

For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms
For legal information about Accedian Skylight products, please visit: Accedian legal terms and tradmarks

Was this article helpful?

What's Next

CSV File Description

Table of contents

Provider Connectivity Assurance Sensor Control
Provider Connectivity Assurance Sensors