Getting Debug Logs for Support and R&D Troubleshooting

Updated on 10 Jul 2024
1 Minute to read
Contributors

Article summary

Did you find this summary helpful?

Thank you for your feedback

This article explains how to obtain debug logs for technical support and R&D troubleshooting.

To get the logs from the Skylight Flex 100 unit

SSH to CPU0 interface using the following command:

#ssh admin@<flex-ip-address for CPU0> -p 830

From the respective log folder, copy logs from Skylight Flex 100 unit to TFTP server using the following command:

# scp <log_file-name> root@<tftp server ip address>:/root

Below you will find log file details for the logs you will be using.

For debug logs: /etc/accedian/history/fsir.log.xxx
For FPGA Link related logs: /etc/accedian/history/linkmon.log -
For FPGA related logs: /tmp/libfpga.log

© 2024 Cisco and/or its affiliates. All rights reserved.

For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms
For legal information about Accedian Skylight products, please visit: Accedian legal terms and tradmarks

Was this article helpful?

What's Next

ACL Commands