Ethernet Connectivity Fault Management (ECFM)

Configuring Maintenance Association This article describes the configuration of the CFM MA at a particular maintenance domain. Notes: The Maintenance Domain must be configured prior to the configuration of the Maintenance Association....

Configuring Maintenance End Points This article describes how to configure Maintenance End Points. Note: The Maintenance Domain and Maintenance Association must be configured prior to the configuration of the Maintenance End Points. ...

Configuring Maintenance End Points for an EPL service This use case article describes the configuration of the MEP for an Ethernet Private Line service. Note : The Maintenance Domain and Maintenance Association must be configured prior to...

Configuring Maintenance End Points for an EVPL service This use case article describes the configuration of the MEP for an Ethernet Virtual Private Line service. Note : The Maintenance Domain and Maintenance Association must be configured...

Configuring Maintenance Domain This article describes the configuration of the CFM MD at a particular maintenance level. CLI Configurations To configure MD on the bridge Login to the privileged EXEC mode. Your Product> enable ...

This article describes how to configure Customer Port-based services. CLI Configurations To configure a port-based service Log in to the privileged EXEC mode. Your Product> enable Bring up all the interfaces by executing no-...

ECFM (Ethernet Connectivity Fault Management) CLI commands are categorized as follows: Enable Commands This section includes ECFM enable commands. ethernet cfm cc enable Command Objective: This command enables the transmission of Conti...