Creating VLAN

This article describes the creation of VLAN on bridges (CUST1, CUST2, and CUST3) and assigning of member ports for the created VLAN.

CLI Configurations

At CUST1, CUST2, and CUST3

• Create VLAN and assign member ports for this VLAN
  your product(config)# vlan 2
  your product(config-vlan)# vlan active
  your product(config-vlan)# ports gigabitethernet 0/1-3
  your product(config-vlan)# exit

SNMP Configurations

At CUST1, CUST2, and CUST3

• Create VLAN and assign member ports for this VLAN
  [Index: ContextID = 0, VlanId=2]
  % snmp0 set {{fsDot1qVlanStaticRowStatus.0.2 createAndWait }}
  [Index: ContextID = 0, VlanId=2, Interface Number = 1]
  % snmp0 set {{fsDot1qVlanStaticPort.0.2.1 addTagged }}
  [Index: ContextID = 0, VlanId=2, Interface Number = 2]
  % snmp0 set {{fsDot1qVlanStaticPort.0.2.2 addTagged }}
  [Index: ContextID = 0, VlanId=2, Interface Number = 3]
  % snmp0 set {{fsDot1qVlanStaticPort.0.2.3 addTagged }}
  [Index: ContextID = 0, VlanId=2]
  % snmp0 set {{fsDot1qVlanStaticRowStatus.0.2 active }}