Y.1731 PM DM Configuration

CLI Configuration

1. CLI command to create or start the proactive DM session for a point-to-point ETH connection.
   your product(config)# ethernet cfm proactive frame delay start domain CUS5 service CUSMA5 local-mpid 9 remote-mpid 10 interval ten-ms test-id 1 test-name DMM_TEST drop-enable
   

   ---

   Note: When this command is executed, if the proactive session is not already present, it is newly created. In case it is already cleared and has a stop status, it will be restarted again with the "Start" option.

   ---

2. CLI command to stop the proactive DM session.
   your product(config)# ethernet cfm proactive frame delay stop domain CUS5 service CUSMA5 local-mpid 9 remote-mpid 10 interval ten-ms test-id 1 drop-enable

3. CLI command to delete the proactive DM session.
   your product(config)# no ethernet cfm proactive frame delay domain CUS5 service CUSMA5 local-mpid 9 remote-mpid 10 test-id 1

4. View all the metrics of the proactive DM session.
   your product# sh eth cfm proactive frame delay buffer

Switch default

Interface : Xl0/1
MEP-ID : 9
RMEP-ID : 10
Level : 5
Test-ID : 1

packets sent = 17460, packets Rcvd = 17459, packets UnAck = 0

Near End Statistics
--------- ----------
Frame Delay Variation min/max/avg = 0.000ms/0.000ms/0.000ms

Round Trip Statistics
--------------- ------
Frame Delay min/max/avg = 0.000ms/0.000ms/0.000ms
Frame Delay Variation min/max/avg = 0.000ms/0.000ms/0.000ms