Telemetry Commands

Telemetry CLI commands are categorized as follows:

• Enable and Disable Command
• Configuration Commands
• Display Commands

Enable and Disable Command

This section includes the telemetry enable and disable commands.

set telemetry

Command Objective:
This command enables and disables the telemetry module.

Syntax:
set telemetry {enable|disable}

Parameter Description:

• enable - Enables the telemetry module.
• disable - Disables the telemetry module.

Mode:
Global Configuration

Default:
enable

Example:

Your Product# set telemetry enable

Configuration Commands

This section includes telemetry configuration commands.

measurement-interval

Command Objective:
This command configures the DMM Sensors measurement interval.

Syntax:
measurement-interval { all }

Parameter Description:

• all - All Sensors types (SLM and DMM)

Mode:
Telemetry Configuration

Example:

 Your Product(telemetry)# measurement-interval 60 all

set dmm enable

Command Objective:
This command configures the DMM sensors.

Syntax:
set dmm {enable|disable}

Parameter Description:

• enable - Enables DMM
• disable - Disables DMM

Mode:
Telemetry Configuration

Example:

Your Product(telemetry)# set dmm enable

set reporter-type

Command Objective:
This command configures the reporter object.

Syntax:
set reporter-type {openmetrics} [status {enable|disable}]
[ip ]
[port <integer(1-65535)>]

Parameter Description:

• reporter-type - List of currently defined reporters.
• enable - Enables Reporter streaming.
• disable - Disables Reporter streaming.
• ip - Destination IP address (IPv4 or IPv6 format).
• port - Destination Port used by Reporter streaming.

Mode:
Telemetry Configuration

Example:

Your Product(acd-telemetry)# set reporter-type openmetrics status enable ip 12.137.11.22 port 11000 

set slm enable

Command Objective:
This command configures the SLM sensors.

Syntax:
set dmm {enable|disable}

Parameter Description:

• enable - Enables SLM
• disable - Disables SLM

Mode:
Telemetry Configuration

Example:

Your Product(telemetry)# set slm enable

Display Commands

This section includes telemetry display commands.

show telemetry

Command Objective:
This command displays the telemetry information.

Syntax:
show telemetry

Mode:
Privileged EXEC Mode

Example:

Your Product# show telemetry

Telemetry Information
  Status               : Enable
---------------------------------
Sensor DMM
  Status               : Disable
  Measurement interval : 60 second
----------------------------------
Sensor SLM
  Status               : Disable
  Measurement interval : 60 second
----------------------------------
Reporter
  Type                 : OpenMetrics
  Status               : Enable
  Destination IP       : 12.137.11.22
  Destination Port     : 11000
  Operation Status     : Connected
  Notice               : Conneted

show telemetry dmm

Command Objective:
This command displays the telemetry sensor DMM status.

Syntax:
show telemetry dmm

Mode:
Privileged EXEC Mode

Example:

Your Product# show telemetry dmm

Status             : Disable
Mesurement-interval: 60 sec.

show telemetry reporter-type

Command Objective:
This command displays the reporter-type configuration.

Syntax:
show telemetry reporter-type

Mode:
Privileged EXEC Mode

Example:

Your Product# show telemetry reporter-type

Reporter
  Type                 : OpenMetrics
  Status               : Enable
  Destination IP       : 12.137.11.22
  Destination Port     : 11000
  Operation Status     : Connected
  Notice               : Connected

Operation Status value can be:

• Connected
• Not Connected

Notice can be:

• Connected
• Connecting
• Disconnected
• Connection Failed due to IP/Port
• Connection Failed due to Certificate not yet valid
• Connection Failed due to Authentication
• Connection Failed due to Unknown

show telemetry slm

Command Objective:
This command displays the telemetry sensor SLM status.

Syntax:
show telemetry slm

Mode:
Privileged EXEC Mode

Example:

Your Product# show telemetry slm

Status             : Enabled
Mesurement-interval: 60 sec.

show telemetry statistics current dmm

Command Objective:
This command displays the current statistics for a DMM sensor.

This is the statistics aggregate for the record in progress.

Syntax:
show telemetry statistics current dmm domain <string(43)>
service <string(45)>
local-mpid <integer(1-8191)>
remote-mpid <integer(1-8191)>
test-id <integer(1-65535)>

Parameter Description:

• domain - Domain related configuration.
• service - Service related configuration.
• local-mpid - Local MEP ID value range from 1 to 8191.
• remote-mpid - The remote MEP ID value range from 1 to 8191.
• test-id - The test ID value range from 1 to 65535.

Mode:
Privilege EXEC Mode

Example:

Your Product# show telemetry statistics current dmm domain MD-0 service MA-0-1000 mpid 1000 rmpid 2000 test-id 1 

Current statistics for DMM
--------------------------

ifindex      : 5
level        : 0
vlanid       : 1000
mepid        : 1000
rmepid       : 2000
testid       : 1

  Start time : 12-09-2021 15:01:28
Current time : 12-09-2021 15:02:09

Suspect flag         : false

Samples              :         42

One-Way Frame Delay
  Valid              : false
  Instant value (us) :  963322392
  Min value (us)     :  963322240
  Max value (us)     :  963322392
  Average value (us) :   42972181

One-Way Inter Frame Delay Variation
  Instant value (us) :          4
  Min value (us)     :          4
  Max value (us)     :          4
  Average value (us) :          4

Two-Way Frame Delay
  Instant value (us) :          0
  Min value (us)     :          0
  Max value (us)     :          0
  Average value (us) :          0

Two-Way Inter Frame Delay Variation
  Instant value (us) :          0
  Min value (us)     :          0
  Max value (us)     :          0
  Average value (us) :          0

show telemetry statistics current slm

Command Objective:
This command display the current statistics for a DMM sensor.

This is the statistics aggregate for the record in-progress.

Syntax:
show telemetry statistics current slm domain <string(43)>
service <string(45)>
local-mpid <integer(1-8191)>
remote-mpid <integer(1-8191)>
test-id <integer(1-65535)>

Parameter Description:

• domain - Domain related configuration.
• service - Service related configuration.
• local-mpid - Local MEP ID value range from 1 to 8191.
• remote-mpid - The remote MEP ID value range from 1 to 8191.
• test-id - The test ID value range from 1 to 65535.

Mode:
Privilege EXEC Mode

Example:

Your Product# show telemetry statistics current slm domain MD-0 service MA-0-1000 mpid 1000 rmpid 2000 test-id 1

Current statistics for SLM
--------------------------

ifindex      : 5
level        : 0
vlanid       : 1000
mepid        : 1000
rmepid       : 2000
testid       : 1

  Start time : 12-09-2021 15:11:28
Current time : 12-09-2021 15:11:52

Suspect flag                   : false

Packet lost near-end           :          0
Total received near-end        :         24
Packet lost far-end            :          0
Total received far-end         :         24
Near-end packet loss ratio (%) :          0
Far-end packet loss ratio (%)  :          0
Number of gaps                 :          0
Largest gaps                   :          0

show telemetry statistics history dmm

Command Objective:
This command displays the history statistics for a DMM sensor.

This is the statistics aggregate for the record in progress.

Syntax:
show telemetry statistics history dmm domain <string(43)>
service <string(45)>
local-mpid <integer(1-8191)>
remote-mpid <integer(1-8191)>
test-id <integer(1-65535)>
{latest|record-id <integer(1-480)>}

Parameter Description:

• domain - Domain related configuration.
• service - Service related configuration.
• local-mpid - Local MEP ID value range from 1 to 8191.
• remote-mpid - The remote MEP ID value range from 1 to 8191.
• test-id - The test ID value range from 1 to 65535.
• latest - Displays the lastest record statistics.
• record-id - Displays a specific record from the archive. Value from 1 to 480;
  1 is the most recent archived data and 480 is the oldest archived data.

Mode:
Privilege EXEC Mode

Example:

Your Product# show telemetry statistics history dmm domain MD-0 service MA-0-1000 mpid 1000 rmpid 2000 test-id 1 latest

History statistics for DMM
--------------------------

ifindex      : 5
level        : 0
vlanid       : 1000
mepid        : 1000
rmepid       : 2000
testid       : 1

  Start time : 01-01-1970 00:00:00
    End time : 12-09-2021 14:59:28
   Period id :          1

Suspect flag         : true

Samples              :         45

One-Way Frame Delay
  Valid              : false
  Min value (us)     :  963321634
  Max value (us)     :  963321795
  Average value (us) :          0

One-Way Inter Frame Delay Variation
  Min value (us)     :          4
  Max value (us)     :          4
  Average value (us) :          0

Two-Way Frame Delay
  Min value (us)     :          0
  Max value (us)     :          0
  Average value (us) :          0

Two-Way Inter Frame Delay Variation
  Min value (us)     :          0
  Max value (us)     :          0
  Average value (us) :          0

show telemetry statistics history slm

Command Objective:
This command displays the history statistics for a SLM sensor.

This is the statistics aggregate for the record in progress.

Syntax:
show telemetry statistics history slm domain <string(43)>
service <string(45)>
local-mpid <integer(1-8191)>
remote-mpid <integer(1-8191)>
test-id <integer(1-65535)>
{latest|record-id <integer(1-480)>}

Parameter Description:

• domain - Domain related configuration.
• service - Service related configuration.
• local-mpid - Local MEP ID value range from 1 to 8191.
• remote-mpid - The remote MEP ID value range from 1 to 8191.
• test-id - The test ID value range from 1 to 65535.
• latest - Displays the lastest record statistics.
• record-id - Displays a specific record from the archive. Value from 1 to 480;
  1 is the most recent archived data and 480 is the oldest archived data.

Mode:
Privilege EXEC Mode

Example:

Your Product# show telemetry statistics history slm domain MD-0 service MA-0-1000 mpid 1000 rmpid 2000 test-id 1 latest

History statistics for SLM
--------------------------

ifindex      : 5
level        : 0
vlanid       : 1000
mepid        : 1000
rmepid       : 2000
testid       : 1

  Start time : 12-09-2021 15:10:28
    End time : 12-09-2021 15:11:28
   Period id :         13

Suspect flag                   : false

Packet lost near-end           :          0
Total received near-end        :         60
Packet lost far-end            :         60
Total received far-end         :          0
Near-end packet loss ratio (%) :          0
Far-end packet loss ratio (%)  :         na
Number of gaps                 :          0
Largest gaps                   :          0