.svg?sv=2022-11-02&spr=https&st=2024-11-15T01%3A46%3A27Z&se=2024-11-15T01%3A56%3A27Z&sr=c&sp=r&sig=w70a74YelJ%2BycvkKDIIrLVg5uZMBt6UrFjd2IblIrlI%3D){kind=logo}
Policer / Metering Entry Burst Size Configuration Guidelines
- 10 Jul 2024
- 1 Minute to read
- Contributors
- Print
- PDF
Policer / Metering Entry Burst Size Configuration Guidelines
- Updated on 10 Jul 2024
- 1 Minute to read
- Contributors
- Print
- PDF
Article summary
Did you find this summary helpful?
Thank you for your feedback
In this article, you will find configuration guidelines that must be followed for Burst Size configuration in the Policer / Metering Entry configuration.
Refer to the following table for the given range or traffic rate to be used in CIR / EIR parameter in Policer / Metering Entry.
| Maximal Rate (CIR/EIR) [bps] | Max Burst (CBS/EBS) [Bytes] |
|---|---|
| 65,535,000.00 | 55,295.00 |
| 1,310,710,000.00 | 514,040.00 |
| 13,107,100,000.00 | 4,184,000.00 |
| 131,071,000,000.00 | 33,543,680.00 |
| 1,310,710,000,000.00 | 268,421,120.00 |
| 13,107,100,000,000.00 | 2,147,440,640.00 |
Note: The configurable range for the CBS and EBS sizes is 0 - 2147440640 bytes.
© 2024 Cisco and/or its affiliates. All rights reserved.
For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms
For legal information about Accedian Skylight products, please visit: Accedian legal terms and tradmarks
Was this article helpful?