PMON Commands

PMON (Performance Monitoring) is used for collecting the history of statistics for port based, proactive SLM and DMM sessions.

PMON commands are categorized as follows:

• Configuration Commands
• Display Commands
• Clear Command

Configuration Commands

This section includes PMON configuration commands.

pmon-15min-bin

Command Objective:
This command configures the total number of PMON 15 minutes history bins used for binning. This value ranges from 1 to 33.

Syntax:
pmon-15min-bin <integer(1-33)>

Mode:
Global Configuration Mode

Default:

33

Example:

Your Product (config)# 
Your Product# pmon-15min-bin 10

pmon-1day-bin

Command Objective:
This commands configures the total number of PMON 1 day history bins used for binning. This value ranges from 1 to 8.

Syntax:
pmon-1day-bin <integer(1-8)>

Mode:
Global Configuration Mode

Default:
8

Example:

Your Product (config)# 
Your Product# pmon-1day-bin 3

pmon policy

Command Objective: This command configures the PMON policy type.

The no form of the command deletes the configured PMON policy type.

Syntax:
pmon policy {port | sap | lm | slm | dm} <integer(1-8)>

no pmon policy {port | sap | lm | slm | dm} <integer(1-8)>

Parameter Description:

• port – Configures the PMON policy type as Port.
• sap – Configures the PMON policy type as Service Access Point (SAP).
• lm – Configures the PMON policy type as Loss Measurement (LM).
• slm – Configures the PMON policy type as Synthetic Loss Measurement (SLM).
• dm - Configures the PMON policy type as Delay Measurement (DM).
• integer(1-8) - Configures the PMON policy identifier. This value ranges from 1 to 8.

Mode:
Global Configuration Mode

Example:

Your Product (config)# 
Your Product# show pmon policy

PMON Policy configuration
-------------------------

PMON Policy Type : port
Policy ID : 1
description :
pmon-15min-bin-count : 32
pmon-1day-bin-count : 8

Policy ID : 2
description :
pmon-15min-bin-count : 32
pmon-1day-bin-count : 8

Policy ID : 3
description :
pmon-15min-bin-count : 32
pmon-1day-bin-count : 8

Policy ID : 4
description :
pmon-15min-bin-count : 32
pmon-1day-bin-count : 8

PMON Policy Type : slm
Policy ID : 1
description :
pmon-15min-bin-count : 33
pmon-1day-bin-count : 8
your product#
your product#

pmon policy dm

Command Objective:
This command configures the PMON DM policy parameters.

The no form of the command deletes the configured PMON DM policy parameters.

Syntax:
pmon policy dm < integer(1-8) > { tca-15min | tca-1day } { RoundTripFrameDelayAverage | RoundTripFrameDelayMax | NearEndFrameDelayVariationAverage | NearEndFrameDelayVariationMax | FarEndFrameDelayVariationAverage | FarEndFrameDelayVariationMax} tca-value < integer64 >

Parameter Description:
integer(1-8)> – Configures the the PMON policy identifier. This value ranges from 1 to 8.
tca-15min - Configures the Threshold Crossing Alert (TCA) for the 15 minutes bins.
tca-1day - Configures the TCA for the 1 day bins.
RoundTripFrameDelayAverage – Configures the ETH-CFM DM average round trip frame delay.
RoundTripFrameDelayMax – Configures the ETH-CFM DM maximum round trip frame delay.
NearEndFrameDelayVariationAverage – Configures the ETH-CFM DM near end average frame delay variation.
NearEndFrameDelayVariationMax – Configures the ETH-CFM DM near end maximum frame delay variation.
FarEndFrameDelayVariationAverage – Configures the ETH-CFM DM far end average frame delay variation.
FarEndFrameDelayVariationMax – Configures Configures the ETH-CFM DM far end maximum frame delay variation.
tca-value < integer64 > - Configures the TCA value for the PMON DM policy.

Mode:
Global Configuration Mode

Example:

Your Product (config)# 
your product # pmon policy dm 1 tca-1day RoundTripFrameDelayAverage tca-value 230

pmon policy port

Command Objective:
This command configures the PMON port policy parameters.

The no form of the command deletes the configured PMON port policy parameters.

Syntax:
pmon policy port <integer(1-8)> {tca-15min | tca-1day} { { port { IfInOctets | IfInDiscards | IfInErrors | IfOutOctets | IfOutDiscards | IfOutErrors | IfInPkts | IfOutPkts | HighCapacityPkts | HighCapacityOctets }} | { queue <integer(2-9)> { PktsDropped | OctetsDropped }} } tca-value

Parameter Description:

• integer(1-8)> – Configures the the PMON policy identifier. This value ranges from 1 to 8.
• tca-15min - Configures the Threshold Crossing Alert (TCA) for the 15 minutes bins.
• tca-1day - Configures the TCA for the 1 day bins.
• port - Configures the general port TCA for the bins.
• IfInOctets – Configures the total number of octets received on port.
• IfInDiscards – Configures the total number of packets discarded on the received port.
• IfInErrors – Configures the the total number of packets errored on the received port.
• IfOutOctets – Configures the total number of octets transmitted on port.
• IfOutDiscards – Configures the total number of packets discarded on the transmitted port.
• IfOutErrors – Configures the total number of packets errored on the transmitted port.
• IfInPkts - Configures the total number of packets received on port
• IfOutPkts – Configures the total number of packets transmitted on port.
• HighCapacityPkts – Configures the total number of packets errored at the transmit port.
• HighCapacityOctets – Configures the total number of octets errored at the transmit port.
• queue - Configures the port queue TCA for the bins. The value ranges from 2 to 9.
• PktsDropped – Configures the total number of packets dropped on egress port queue.
• OctetsDropped - Configures the total number of octets dropped on egress port queue.
• tca-value - Configures the Threshold Crossing Alert (TCA) value for the PMON port policy.

Mode:
Global Configuration Mode

Example:

Your Product (config)# 
Your Product # pmon policy port 1 tca-15min port IfInOctets tca-value 1000000

pmon policy slm

Command Objective:
This command configures the PMON SLM policy parameters.

The no form of the command deletes the configured PMON SLM policy parameters.

Syntax:
pmon policy slm <integer(1-8)> { tca-15min { NearEndFrameLossRatioAverage | FarEndFrameLossRatioAverage } | tca-1day {NearEndFrameLossRatioAverage | FarEndFrameLossRatioAverage | NearEndHighLoss | FarEndHighLoss} | tca-continuous {NearEndFrameLossRatioAverage | FarEndFrameLossRatioAverage | NearEndHighLoss | FarEndHighLoss | NearEndFrameLossRatioMax | FarEndFrameLossRatioMax } } tca-value

Parameter Description:

• integer(1-8) – Configures the the PMON policy identifier. This value ranges from 1 to 8.
• tca-15min - Configures the Threshold Crossing Alert (TCA) for the 15 minutes bins.
• NearEndFrameLossRatioAverage – Configures the ETH-CFM SLM near end frame loss ratio average count.
• FarEndFrameLossRatioAverage – Configures ETH-CFM SLM far end frame loss ratio average count.
• tca-1day - Configures the TCA for the 1 day bins.
• NearEndFrameLossRatioAverage – Configures the ETH-CFM SLM near end frame loss ratio average count.
• FarEndFrameLossRatioAverage – Configures ETH-CFM SLM far end frame loss ratio average count.
• NearEndHighLoss – Configures the number of high loss intervals (HLI) over time in the near-end direction. High loss interval (HLI) is the availability interval during which the flr is larger than 0.5. The value starts at 0 and increments for every HLI that occurs.
• FarEndHighLoss - Configures the number of HLI over time in the near-end direction. HLI is the availability interval during which the flr is larger than 0.5. The value starts at 0 and increments for every HLI that occurs.
• tca-continuous - Configures the TCA for the continuous bins.
• NearEndFrameLossRatioAverage – Configures the ETH-CFM SLM near end frame loss ratio average count.
• FarEndFrameLossRatioAverage – Configures ETH-CFM SLM far end frame loss ratio average count.
• NearEndHighLoss – Configures the number of HLI over time in the near-end direction.
• FarEndHighLoss - Configures the number of HLI over time in the near-end direction.
• NearEndFrameLossRatioMax – Configures ETH-CFM SLM near end frame loss ratio maximum count.
• FarEndFrameLossRatioMax – Configures ETH-CFM SLM far end frame loss ratio maximum count.
• tca-value - Configures the TCA value for the PMON SLM policy.

Mode:
Global Configuration Mode

Example:

Your Product (config)# 
Your Product# pmon policy slm 1 tca-15min NearEndFrameLossRatioAverage tca-value 70

pmon proactive-test

Command Objective:
This command configures the ETH-CFM OAM proactive test name for the policy type.

The no form of the command deletes the configured proactive name.

Syntax:
pmon proactive-test <string(32)> { slm | dm } <integer(1-8)>

no pmon proactive-test <string(32)>

Parameter Description:

• slm – Configures proactive test name for the SLM policy type.
• dm – Configures proactive test name for the DM policy type.
• integer(1-8) – Configures the the PMON policy identifier. This value ranges from 1 to 8.

Mode:
Global Configuration Mode

Example:

Your Product (config)# 
your product# pmon proactive-test SLM_Test_1 1

your product# pmon proactive-test DMM_Test_1 1  

Display Commands

This section includes PMON display commands.

show pmon policy

Command Objective:
This command displays the PMON policy Configuration, TCA Configuration and Association

Syntax:
show pmon policy [{port | sap | lm | slm | dm} [<integer(1-8)> [ {tca | association} ] ] ]

Parameter Description:

• port – Displays the configured PMON port policy.
• sap – Displays the configured PMON SAP policy.
• lm – Displays the configured PMON LM policy.
• slm – Displays the configured PMON SLM policy.
• dm – Displays the configured PMON DM policy.
• integer(1-8) - Displays the the PMON policy identifier. This value ranges from 1 to 8.
• tca – Displays the configured TCA values.
• association – Displays the PMON policy association details.

Mode:
Privileged EXEC Mode

Example:

Your Product # show pmon policy

show pmon stats dm

Command Objective:
This command displays the statistical information of the configured PMON DM policy.

Syntax:
show pmon stats dm <string(32)> [{interval {pmon-15min | pmon-1day }} [bin <integer(0-32)>]]

Parameter Description:

• dm <string(32)> - Displays the configured DM policy. This value is a string of maximum size 32.
• interval – Displays the details of the PMON policy intervals.
• pmon-15min – Displays the interval details for PMON 15 min bins.
• pmon-1day – Displays the interval details for PMON 1 day bins.
• bin <integer(0-32)> - Displays the Bin Number. This value ranges from 0 to 32 (0 - current bin,1 - previous bin, 8/32 - maximum bin number for 1day/15min interval).

Mode:
Privileged EXEC Mode

Example:

Your Product# show pmon stats dm DMM_Test_1 

PMON DM STATS:
---------------

TestName: DMM_TEST, Interval: 15min, Bin: 0
--------------------------------------

FsPmonEthCfmDmStatsBinStatus: NA
FsPmonEthCfmDmStatsStartTime: Wed Jan  1 03:37:06 2020
FsPmonEthCfmDmStatsRoundTripFrameDelayMin: 0
FsPmonEthCfmDmStatsRoundTripFrameDelayAverage: 0
FsPmonEthCfmDmStatsRoundTripFrameDelayMax: 0
FsPmonEthCfmDmStatsNearEndFrameDelayVariationMin: 0
FsPmonEthCfmDmStatsNearEndFrameDelayVariationAverage: 0
FsPmonEthCfmDmStatsNearEndFrameDelayVariationMax: 0
FsPmonEthCfmDmStatsFarEndFrameDelayVariationMin: 0
FsPmonEthCfmDmStatsFarEndFrameDelayVariationAverage : 0
FsPmonEthCfmDmStatsFarEndFrameDelayVariationMax: 0

show pmon stats port

Command Objective:
This command displays the statistical information of the configured PMON port policy.

Syntax:
show pmon stats port < interface-type > < interface-id > [{interval {pmon-15min | pmon-1day}} [bin < integer(0-32) >]]

Parameter Description:

• interface-type - Displays the PMON port statistical information for the specified type of interface. The interface can be:
• fastethernet – Officially referred to as 100BASE-T standard. This is a version of LAN standard architecture that supports data transfer up to 100 Megabits per second.
• gigabitethernet – A version of LAN standard architecture that supports data transfer up to 1 Gigabit per second.
• extreme-ethernet – A version of Ethernet that supports data transfer up to 10 Gigabits per second. This Ethernet supports only full duplex links.
• internal-lan – Internal LAN created on a bridge per IEEE 802.1ap.
• port-channel – Logical interface that represents an aggregator which contains several ports aggregated together.
• interface-id - Displays the PMON port statistical information for the specified interface number. This is a unique value that represents the specific interface. This value is a combination of slot number and port number separated by a slash, for interface type other than internal-lan and port-channel. Only i-lan or port-channel ID is provided, for interface types internal-lan and port-channel.
• interval – Displays the details of the PMON policy intervals.
• pmon-15min – Displays the interval details for PMON 15 min bins.
• pmon-1day – Displays the interval details for PMON 1 day bins.
• bin - Displays the Bin Number. This value ranges from 0 to 32 (0 - current bin,1 - previous bin, 8/32 - maximum bin number for 1day/15min interval).

Mode:
Privileged EXEC Mode

Example:

Your Product # 
Your Product # show pmon stats port xl 0/2

PMON PORT STATS:
---------------

Port index: 2, Interval: 15min, Bin: 0
--------------------------------------

fsPmonEthPortStatsStartTime: Sat Jan  4 00:30:01 2020
fsPmonEthPortStatsBinStatus: Adjusted
fsPmonEthPortStatsIfInOctets: 147600
fsPmonEthPortStatsIfInUcastPkts: 0
fsPmonEthPortStatsIfInDiscards: 0
fsPmonEthPortStatsIfInErrors: 0
fsPmonEthPortStatsIfInUnknownProtos: 0
fsPmonEthPortStatsIfInMcastPkts: 0
fsPmonEthPortStatsIfInBcastPkts : 0
fsPmonEthPortStatsIfOutOctets : 0
fsPmonEthPortStatsIfOutUcastPkts : 0
fsPmonEthPortStatsIfOutDiscards : 0
fsPmonEthPortStatsIfOutErrors : 0
fsPmonEthPortStatsIfOutMcastPkts : 0
fsPmonEthPortStatsIfOutBcastPkts : 0
fsPmonEthPortStatsIfInPkts : 0
fsPmonEthPortStatsIfOutPkts : 0
fsPmonEthPortEtherStatsDropEvents : 0
fsPmonEthPortEtherStatsBcastPkts : 0
fsPmonEthPortEtherStatsMcastPkts : 0
fsPmonEthPortEtherStatsCrcAlignErrors : 0
fsPmonEthPortEtherStatsUnderSizePkts : 0
fsPmonEthPortEtherStatsOverSizePkts : 0
fsPmonEthPortEtherStatsFragments : 0
fsPmonEthPortEtherStatsJabbers : 0
fsPmonEthPortEtherStatsCollisions : 0
fsPmonEthPortEtherStatsHighCapacityPkts : 0
fsPmonEthPortEtherStatsHighCapacityOctets : 147600
fsPmonEthPortEtherStatsHighCapacityPkts64Octets : 0
fsPmonEthPortEtherStatsHighCapacityPkts65to127Octets : 0
fsPmonEthPortEtherStatsHighCapacityPkts128to255Octets : 0
fsPmonEthPortEtherStatsHighCapacityPkts256to511Octets : 0
fsPmonEthPortEtherStatsHighCapacityPkts512to1023Octets : 0
fsPmonEthPortEtherStatsHighCapacityPkts1024to1518ctets : 0
fsPmonEthPortEtherStatsHighCapacityPkts1519toMaxOctets : 0
fsPmonEthPortDot3StatsAlignmentErrors : 0
fsPmonEthPortDot3StatsFCSErrors : 0
fsPmonEthPortDot3StatsSingleCollisionFrames : 0
fsPmonEthPortDot3StatsMultipleCollisionFrames : 0
fsPmonEthPortDot3StatsSQETestErrors  : 0
fsPmonEthPortDot3StatsDeferredTransmissions  : 0
fsPmonEthPortDot3StatsLateCollisions : 0
fsPmonEthPortDot3StatsExcessiveCollisions : 0
fsPmonEthPortDot3StatsernalMacTransmitErrors : 0
fsPmonEthPortDot3StatsCarrierSenseErrors : 0
fsPmonEthPortDot3StatsFrameTooLongs : 0
fsPmonEthPortDot3StatsernalMacReceiveErrors : 0
fsPmonEthPortDot3StatsSymbolErrors : 0

show pmon stats slm

Command Objective:
This command displays the statistical information of the configured PMON SLM policy.

Syntax:
show pmon stats slm <string(32)> [{interval {pmon-15min | pmon-1day | pmon-continous}} [bin <integer(0-32)>]]

Parameter Description:

• slm <string(32)> - Displays the configured SLM policy. This value is a string of maximum size 32.
• interval – Displays the details of the PMON policy intervals.
• pmon-15min – Displays the interval details for PMON 15 min bins.
• pmon-1day – Displays the interval details for PMON 1 day bins.
• pmon-continous
• bin <integer(0-32)> - Displays the Bin Number. This value ranges from 0 to 32 (0 - current bin,1 - previous bin, 8/32 - maximum bin number for 1day/15min interval).

Mode:
Privileged EXEC Mode

Example:

Your Product # 
Your Product# show  pmon  stats slm  SLM_Test_1

PMON SLM STATS:
---------------

TestName: SLM_TEST, Interval: 15min, Bin: 0
--------------------------------------------

FsPmonEthCfmSlmStatsBinStatus: Partial
FsPmonEthCfmSlmStatsStartTime: Thu Jan  2 05:45:02 2020
FsPmonEthCfmSlmStatsNearEndFrameLossRatioMin: 5
FsPmonEthCfmSlmStatsNearEndFrameLossRatioAverage: 5
FsPmonEthCfmSlmStatsNearEndFrameLossRatioMax: 6
FsPmonEthCfmSlmStatsFarEndFrameLossRatioMin: 34
FsPmonEthCfmSlmStatsFarEndFrameLossRatioAverage: 36
FsPmonEthCfmSlmStatsFarEndFrameLossRatioMax: 39
FsPmonEthCfmSlmStatsNearEndHighLoss: 0
FsPmonEthCfmSlmStatsFarEndHighLoss: 0
FsPmonEthCfmSlmStatsNearEndUnavailable: 0
FsPmonEthCfmSlmStatsFarEndUnavailable: 0


TestName: SLM_TEST, Interval: 15min, Bin: 1
-------------------------------------------

FsPmonEthCfmSlmStatsBinStatus: Data Complete
FsPmonEthCfmSlmStatsStartTime: Thu Jan  2 05:30:01 2020
FsPmonEthCfmSlmStatsNearEndFrameLossRatioMin: 2
FsPmonEthCfmSlmStatsNearEndFrameLossRatioAverage: 2
FsPmonEthCfmSlmStatsNearEndFrameLossRatioMax: 6
FsPmonEthCfmSlmStatsFarEndFrameLossRatioMin: 16
FsPmonEthCfmSlmStatsFarEndFrameLossRatioAverage: 26
FsPmonEthCfmSlmStatsFarEndFrameLossRatioMax: 39
FsPmonEthCfmSlmStatsNearEndHighLoss: 0
FsPmonEthCfmSlmStatsFarEndHighLoss: 0
FsPmonEthCfmSlmStatsNearEndUnavailable: 0
FsPmonEthCfmSlmStatsFarEndUnavailable: 0

TestName: SLM_TEST, Interval: 15min, Bin: 2
--------------------------------------------

FsPmonEthCfmSlmStatsBinStatus: Data Complete
FsPmonEthCfmSlmStatsStartTime: Thu Jan  2 05:22:25 2020
FsPmonEthCfmSlmStatsNearEndFrameLossRatioMin: 1
FsPmonEthCfmSlmStatsNearEndFrameLossRatioAverage: 1
FsPmonEthCfmSlmStatsNearEndFrameLossRatioMax: 1
FsPmonEthCfmSlmStatsFarEndFrameLossRatioMin: 2
FsPmonEthCfmSlmStatsFarEndFrameLossRatioAverage: 6
FsPmonEthCfmSlmStatsFarEndFrameLossRatioMax: 10
FsPmonEthCfmSlmStatsNearEndHighLoss: 0
FsPmonEthCfmSlmStatsFarEndHighLoss: 0
FsPmonEthCfmSlmStatsNearEndUnavailable: 0
FsPmonEthCfmSlmStatsFarEndUnavailable: 0

Clear Command

This section includes the PMON clear command.

clear pmon

Command Objective:
This command clears the PMON policy configurations.

Syntax:
clear pmon { port < ifXtype > < ifsnum > | sap ac < ifXtype > < ifsnum > | test string(32)} [interval {pmon-15min | pmon-1day}]

Parameter Description:

• port < ifXtype > - Displays the PMON port statistical information for the specified type of interface. The interface can be:
• fastethernet – Officially referred to as 100BASE-T standard. This is a version of LAN standard architecture that supports data transfer up to 100 Megabits per second.
• gigabitethernet – A version of LAN standard architecture that supports data transfer up to 1 Gigabit per second.
• extreme-ethernet – A version of Ethernet that supports data transfer up to 10 Gigabits per second. This Ethernet supports only full duplex links.
• internal-lan – Internal LAN created on a bridge per IEEE 802.1ap.
• port-channel – Logical interface that represents an aggregator which contains several ports aggregated together.
• port < ifsnum > - Displays the PMON port statistical information for the specified interface number. This is a unique value that represents the specific interface. This value is a combination of slot number and port number separated by a slash, for interface type other than internal-lan and port-channel. Only i-lan or port-channel ID is provided, for interface types internal-lan and port-channel.
• sap ac < ifXtype > - Displays the PMON port statistical information for the specified type of interface. The interface can be:
• fastethernet – Officially referred to as 100BASE-T standard. This is a version of LAN standard architecture that supports data transfer up to 100 Megabits per second.
• gigabitethernet – A version of LAN standard architecture that supports data transfer up to 1 Gigabit per second.
• extreme-ethernet – A version of Ethernet that supports data transfer up to 10 Gigabits per second. This Ethernet supports only full duplex links.
• internal-lan – Internal LAN created on a bridge per IEEE 802.1ap.
• port-channel – Logical interface that represents an aggregator which contains several ports aggregated together.
• sap ac < ifsnum > - Displays the PMON port statistical information for the specified interface number. This is a unique value that represents the specific interface. This value is a combination of slot number and port number separated by a slash, for interface type other than internal-lan and port-channel. Only i-lan or port-channel ID is provided, for interface types internal-lan and port-channel.
• test string(32) – Clears the configured proactive test name. This value is the string of maximum size 32.
• interval – Clears the configuration details of the PMON policy intervals.
• pmon-15min – Clears the interval details for PMON 15 min bins.
• pmon-1day – Clears the interval details for PMON 1 day bins.

Mode:
Global Configuration Mode

Example:

Your Product (config)# clear pmon