Installation Procedure for Accedian Board
- 17 Jul 2023
- 1 Minute to read
- Contributors
- Print
- DarkLight
- PDF
Installation Procedure for Accedian Board
- Updated on 17 Jul 2023
- 1 Minute to read
- Contributors
- Print
- DarkLight
- PDF
Article Summary
Share feedback
Thanks for sharing your feedback!
Connecting to the Board
There is an RJ45 console as a serial connection, 115200 N81; this console displays boot messages as it is a connection to Skylight Flex. The default Flex user is root, the default password is admin123.
SSH and Telnet connections over IPv4 are supported after IP address configuration.
Note: Telnet is disabled by default and must be configured. See Enabling Telnet.
SSH Procedure
From a Linux server, the following command establishes an SSH client session with the specified OOB management interface IP address.
- The following command should be used for Flex CLI reachability via management port from a host.
#ssh -o KexAlgorithms=diffie-hellman-group14-sha1 root@<flex-ip-address>
© 2024 Accedian Networks Inc. All rights reserved. Accedian®, Accedian Networks®, the Accedian logo™, Skylight™, Skylight Interceptor™ and per-packet intel™, are trademarks or registered trademarks of Accedian Networks Inc. To view a list of Accedian trademarks visit: http://accedian.com/legal/trademarks/.
Was this article helpful?
