Initiating Frame Delay Measurement
  • 10 Jul 2024
  • 1 Minute to read
  • Contributors
  • PDF

Initiating Frame Delay Measurement

  • PDF

Article summary

This article describes the intiation of frame delay measurement.

CLI Configurations

At CUST1

  • Initiate a two-way frame delay measurement from MEP at CUST1 to MEP at CUST3.
    your product# ethernet cfm frame delay start type two-way level 5 vlan 2 mac 00:03:02:03:04:02 count 5

  • Wait for 5 seconds and view the frame delay buffer to see the result.
    your product# show ethernet cfm frame delay buffer detail

Interface : gigabitethernet 0/2
MEP-ID    : 10
Level     : 5
VLAN-ID   : 2
peer mac-address    frame-delay    IFDV       FDV
-----------------   -----------    ----       ---
00:03:02:03:04:02   110.0ms        0.000ms    0.000ms
00:03:02:03:04:02   120.0ms        10.00ms    10.00ms
00:03:02:03:04:02   120.0ms        10.00ms    0.000ms
00:03:02:03:04:02   120.0ms        10.00ms    0.000ms
00:03:02:03:04:02   120.0ms        10.00ms    0.000ms
- 00:01:02:03:04:02 two-way frame delay statistics ---
timestamp = 12 Aug 2008 9:52:22, packets sent = 5, packets received = 5,
delay min/avg/max = 110.0ms/118.0ms/120.0ms,
variation avg IFDV/FDV = 8.000ms/2.000ms

SNMP Configurations

At CUST1

  • Initiate two-way frame delay measurement from MEP at CUST1 to MEP at CUST3. [Index: ContextID = 0, MD-Index = 1, MA-Index = 1, MEP-ID = 10]
    % snmp0 set {{fsMIY1731MepTransmitDmInterval.0.1.1.10 100 }}
    % snmp0 set {{fsMIY1731MepTransmitDmType.0.1.1.10 twoWay }}
    % snmp0 set {{fsMIY1731MepTransmitDmMessages.0.1.1.10 5 }}
    % snmp0 set {{fsMIY1731MepTransmitDmDestIsMepId.0.1.1.10 false }}
    % snmp0 set {{fsMIY1731MepTransmitDmDestMacAddress.0.1.1.10 00:03:02:03:04:02 }}
    % snmp0 set {{fsMIY1731MepTransmitDmStatus.0.1.1.10 start }}

  • Verify whether the delay measurement message counter is incremented for the delay measurement messages sent.
    [Index: Interface Number = 2]
    % snmp0 get {fsMIY1731PortDmmOut.2 }

{1.3.6.1.4.1.29601.2.7.1.1.1.1.14.2 Unsigned32 5}

© 2024 Cisco and/or its affiliates. All rights reserved.
 
For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms

For legal information about Accedian Skylight products, please visit: Accedian legal terms and tradmarks



Was this article helpful?

Changing your password will log you out immediately. Use the new password to log back in.
First name must have atleast 2 characters. Numbers and special characters are not allowed.
Last name must have atleast 1 characters. Numbers and special characters are not allowed.
Enter a valid email
Enter a valid password
Your profile has been successfully updated.