Initiating Availability Measurement

This article describes the initiation of Availability Measurement.

CLI Configurations

At CUST1

• Initiate an availability measurement from MEP at CUST1 to MEP at CUST3.
  your product# ethernet cfm availability measure start level 5 vlan 2 mpid 2 interval 1000 deadline 10 switch default

• Wait for 10 seconds to see the Availability Percentage.
  your product# Show ethernet cfm availability percentage level 5 vlan 2 switch default

Switch default
Interface :  Gi0/1
MEP-ID    :  10
RMEP-ID   :  2
Level     :  5
VLAN-ID   :  2
ISID      : -
Availability Percentage: 100.0

SNMP Configurations

At CUST1

• Initiate an availability measurement from MEP at CUST1 to MEP at CUST3. [Index: ContextID = 0, MD-Index = 1, MA-Index = 1, MEP-ID = 10]
  % snmp0 set {{fsMIY1731MepAvailabilityRowStatus.0.1.1.10 5 }
  % snmp0 set {{fsMIY1731MepAvailabilityInterval.0.1.1.10 interval1s }}
  % snmp0 set {{fsMIY1731MepAvailabilityDeadline.0.1.1.10 5 }}
  % snmp0 set {{fsMIY1731MepAvailabilityDestMacAddress.0.1.1.10 00:03:02:03:04:02 }}
  % snmp0 set {{fsMIY1731MepAvailabilityWindowSize.0.1.1.10 4 }}
  % snmp0 set {{fsMIY1731MepAvailabilityRowStatus*.0.1.1.10 1* }
  % snmp0 set {{fsMIY1731MepAvailabilityStatus.0.1.1.10 start }}

• Verify whether the availability percentage is updated after 5 seconds. [Index: ContextID = 0, MD-Index = 1, MA-Index = 1, MEP-ID = 10]
  % snmp0 get {{fsMIY1731MepAvailabilityStatus.0.1.1.10 }

{ 1.3.6.1.4.1.29601.2.7.1.2.16.1.17 {OCTET STRING} 31:30:2e:30:30}