Enabling Ethernet CCM Offload

By default, CCM offloading is in the disabled state. That is, it does not generate or receive the CCM PDU(s) through hardware.

CLI Configurations

To enable CCM offloading

1. Enter into the global configuration mode.
   your product# configure terminal

2. Enable CCM offloading on all the MEPs
   your product(config)# ethernet cfm offload

To disable CCM offloading

1. Enter into the global configuration mode and disable CCM offloading on all the MEPs
   your product(config)# no ethernet cfm offload
   

   ---

   Note: CCM Offloading can be enabled on MEP also using set ethernet cfm offload command.

   ---

SNMP Configurations

1. Enable CCM offloading on all the MEPs [Index: ContextID = 0].
   % snmp0 set {{fsMIEcfmGlobalCcmOffload.0 enabled }}

2. Disable CCM offloading on all the MEPs [Index: ContextID = 0].
   % snmp0 set {{fsMIEcfmGlobalCcmOffload.0 disabled }}
   

   ---

   Note: Enable CCM offloading on a particular MEP: [Index: ContextID = 0, MD-Index = 1, MA-Index = 1, MEP-ID = 5]
   % snmp0 set {{fsMIEcfmMepRowStatus.0.1.1.5 notInService }}
   % snmp0 set {{fsMIEcfmMepCcmOffload .0.1.1.5 enabled }}
   % snmp0 set {{fsMIEcfmMepRowStatus.0.1.1.5 active }}

   ---