Enabling CCM Transmission

This article describes the enabling of the CCM transmission on bridges CUST1 and CUST3.

CLI Configurations

At CUST1 and CUST3

• Enable CCM transmission
  your product# configure terminal
  your product(config)# ethernet cfm cc enable level 5 vlan 2
  your product(config)# exit

SNMP Configurations

At CUST1

• Enable CCM transmission. [Index: ContextID = 0, MD-Index = 1, MA-Index = 1, MEP-ID = 10]
  % snmp0 set {{fsMIEcfmMepRowStatus.0.1.1.10 notInService }}
  % snmp0 set {{fsMIEcfmExtMepCciEnabled.0.1.1.10 true }}
  % snmp0 set {{fsMIEcfmMepRowStatus.0.1.1.10 active }}

At CUST3

• Enable CCM transmission. [Index: ContextID = 0, MD-Index = 1, MA-Index = 1, MEP-ID = 30]
  % snmp0 set {{fsMIEcfmMepRowStatus.0.1.1.30 notInService }}
  % snmp0 set {{fsMIEcfmExtMepCciEnabled.0.1.1.30 true }}
  % snmp0 set {{fsMIEcfmMepRowStatus.0.1.1.30 active }}