Creating Interfaces

This article describes the creation and configuration of interfaces at CUST1, CUST2, and CUST3.

CLI Configurations

At CUST1, CUST2, and CUST3

• Enable interfaces
  your product# configure terminal
  your product(config)# interface gigabitethernet 0/1
  your productiss(config-if)# exit
  your product(config)# interface gigabitethernet 0/2
  your product(config-if)# no shutdown
  your product(config-if)# exit
  your product(config)# interface gigabitethernet 0/3
  your product(config-if)# no shutdown
  your product(config-if)# exit

SNMP Configurations

At CUST1, CUST2, and CUST3

• Enable interfaces
  [Index: Interface Number = 1]
  % snmp0 set {{ifMainAdminStatus.1 up }}
  % snmp0 set {{fsVcId.1 0 }}
  % snmp0 set {{fsVcIfRowStatus.1 active }}
  [Index: Interface Number = 2]
  % snmp0 set {{ifMainAdminStatus.2 up }}
  % snmp0 set {{fsVcId.2 0 }}
  % snmp0 set {{fsVcIfRowStatus.2 active }}
  [Index: Interface Number = 3]
  % snmp0 set {{ifMainAdminStatus.3 up }}
  % snmp0 set {{fsVcId.3 0}}
  % snmp0 set {{fsVcIfRowStatus.3 active }}