- Print
- PDF
Article summary
Did you find this summary helpful?
Thank you for your feedback
This article describes the configuration of bridge mode for the bridges.
CLI Configurations
At Switch1 and Switch5
- Set the bridge-mode as customer and spanning tree mode as mst.
your product#configure terminal
your product(config)# shutdown spanning-tree
your product(config)# set gvrp disable
your product(config)# set gmrp disable
your product(config)# shutdown garp
your product(config)# bridge-mode customer
your product(config)# no shutdown garp
your product(config)# set gvrp enable
your product(config)# spanning-tree mode mst
At Switch2 and Switch6
- Set the bridge-mode as provider-edge and spanning tree mode as mst.
your product(config)# shutdown spanning-tree
your product(config)# set gvrp disable
your product(config)# set gmrp disable
your product(config)# shutdown garp
your product(config)# bridge-mode provider-edge
your product(config)# no shutdown garp
your product(config)# set gvrp enable
your product(config)# spanning-tree mode mst
At Switch3, Switch4, Switch7 and Switch8
- Set the bridge-mode as provider-core and spanning tree mode as mst.
your product(config)# shutdown spanning-tree
your product(config)# set gvrp disable
your product(config)# set gmrp disable
your product(config)# shutdown garp
your product(config)# bridge-mode provider-core
your product(config)# no shutdown garp
your product(config)# set gvrp enable
your product(config)# spanning-tree mode mst
SNMP Configurations
At Switch1 and Switch5
- Set the bridge-mode as customerBridge. [Index: ContextID = 0]
% snmp0 set {{fsMIMstSystemControl.0 shutdown }}
% snmp0 set {{fsDot1qGvrpStatus.0 disabled }}
% snmp0 set {{fsDot1dGmrpStatus.0 disabled }}
% snmp0 set {{fsMIDot1qFutureGarpShutdownStatus.0 true }}
% snmp0 set {{fsMIEcfmSystemControl.0 shutdown }}
% snmp0 set {{fsMIVlanBridgeMode.0 customerBridge }}
% snmp0 set {{fsMIDot1qFutureGarpShutdownStatus.0 false }}
% snmp0 set {{fsDot1qGvrpStatus.0 enabled }}
% snmp0 set {{fsDot1dGmrpStatus.0 enabled }}
% snmp0 set {{fsMIMstSystemControl.0 start }}
% snmp0 set {{fsMIMstModuleStatus.0 enabled }}
% snmp0 set {{fsMIDot1qFutureVlanShutdownStatus.0 false }}
At Switch2 and Switch6
- Set the bridge-mode as providerEdgeBridge. [Index: ContextID = 0]
% snmp0 set {{fsMIMstSystemControl.0 shutdown }}
% snmp0 set {{fsDot1qGvrpStatus.0 disabled }}
% snmp0 set {{fsMIDot1qFutureGarpShutdownStatus.0 true }}
% snmp0 set {{fsMIEcfmSystemControl.0 shutdown }}
% snmp0 set {{fsMIVlanBridgeMode.0 providerEdgeBridge }}
% snmp0 set {{fsMIDot1qFutureGarpShutdownStatus.0 false }}
% snmp0 set {{fsDot1qGvrpStatus.0 enabled }}
% snmp0 set {{fsMIMstSystemControl.0 start }}
% snmp0 set {{fsMIMstModuleStatus.0 enabled }}
% snmp0 set {{fsMIDot1qFutureVlanShutdownStatus.0 false }}
At Switch3, Switch4, Switch7 and Switch8
- Set the bridge-mode as providerCoreBridge. [Index: ContextID = 0]
% snmp0 set {{fsMIMstSystemControl.0 shutdown }}
% snmp0 set {{fsDot1qGvrpStatus.0 disabled }}
% snmp0 set {{fsMIDot1qFutureGarpShutdownStatus.0 true }}
% snmp0 set {{fsMIEcfmSystemControl.0 shutdown }}
% snmp0 set {{fsMIVlanBridgeMode.0 providerCoreBridge }}
% snmp0 set {{fsMIDot1qFutureGarpShutdownStatus.0 false }}
% snmp0 set {{fsDot1qGvrpStatus.0 enabled }}
% snmp0 set {{fsMIMstSystemControl.0 start }}
% snmp0 set {{fsMIMstModuleStatus.0 enabled }}
% snmp0 set {{fsMIDot1qFutureVlanShutdownStatus.0 false }}
© 2024 Cisco and/or its affiliates. All rights reserved.
For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms
For legal information about Accedian Skylight products, please visit: Accedian legal terms and tradmarks
Was this article helpful?