Configuring Maintenance Domain

This article describes the configuration of the CFM MD at a particular maintenance level.

CLI Configurations

To configure MD on the bridge

1. Log in to the privileged EXEC mode.
   your product> enable
   

   ---

   Note: To log in to the User Exec mode, use guest as the Username and guest123 as the password. To log in to the Privileged mode, use the enable command or log in with username as root and password as admin123.

   ---

2. Enter into the global Configuration mode.
   your product# configure terminal

3. Configure the domain name and maintenance level.
   your product(config)# ethernet cfm domain name TestDomain1 level 7
   your product (config-ether-ecfm)#
   To delete configured MD,

• Enter into the global configuration mode and delete the configured MD.

your product(config)# no ethernet cfm domain name TestDomain1 level 7

SNMP Configurations

To configure MD on the bridge [Index: ContextID = 0, MD-Index = 1]

1. Configure the row status as createAndWait.
   % snmp0 set {{fsMIEcfmMdRowStatus.0.1 createAndWait }}

2. Configure name as TestDomain1 [Octet value: 54:65:73:74:44:6f:6d:61:69:6e:31] and maintenance domain level as 7.
   % snmp0 set {{fsMIEcfmMdMdLevel. 0.1 7 }}
   % snmp0 set {{fsMIEcfmMdName.0.1 54:65:73:74:44:6f:6d:61:69:6e:31 }}

3. Configure the row status as active.
   % snmp0 set {{fsMIEcfmMdRowStatus.0.1 active }}

To delete the configured MD [Index: ContextID = 0, MD-Index = 1]

% snmp0 set {{fsMIEcfmMdRowStatus.0.1 destroy }}