Configuring Interfaces on Switches
  • 10 Jul 2024
  • 1 Minute to read
  • Contributors
  • PDF

Configuring Interfaces on Switches

  • PDF

Article summary

This article describes the configuration of interfaces on the bridges.

CLI Configurations

At Switch1, Switch2, Switch5 and Switch6

  • Create interfaces as up.
    your product(config)# interface gigabitethernet 0/2
    your product(config-if)# no shutdown
    your product(config-if)# exit
    your product(config)# interface
    gigabitethernet 0/3
    your product(config-if)# no shutdown
    your product(config-if)# exit
    your product(config)# interface
    gigabitethernet 0/4
    your product(config-if)# no shutdown
    your product(config-if)# exit
    your product(config)# interface
    gigabitethernet 0/5
    your product(config-if)# no shutdown
    your product(config-if)# exit

At Switch3, Switch4, Swicth7 and Switch8

  • Create interfaces as up.
    your product(config)# interface gigabitethernet 0/2
    your product(config-if)# no shutdown
    your product(config-if)# exit
    your product(config)# interface
    gigabitethernet 0/3
    your product(config-if)# no shutdown
    your product(config-if)# exit
    your product(config)# interface
    gigabitethernet 0/4
    your product(config-if)# no shutdown
    your product(config-if)# exit

SNMP Configurations

At Switch1, Switch2, Switch5 and Switch6

  • Create interfaces as up.
    [Index: Interface Number = 2]
    % snmp0 set {{ifMainAdminStatus.2 up }}
    % snmp0 set {{fsVcId.2 0}}
    % snmp0 set {{fsVcIfRowStatus.2 active }}
    [Index: Interface Number = 3]
    % snmp0 set {{ifMainAdminStatus.3 up }}
    % snmp0 set {{fsVcId.3 0}}
    % snmp0 set {{fsVcIfRowStatus.3 active }}
    [Index: Interface Number = 4]
    % snmp0 set {{ifMainAdminStatus.4 up }}
    % snmp0 set {{fsVcId.4 0 }}
    % snmp0 set {{fsVcIfRowStatus.4 active }}
    [Index: Interface Number = 5]
    % snmp0 set {{ifMainAdminStatus.5 up }}
    % snmp0 set {{fsVcId.5 0 }}
    % snmp0 set {{fsVcIfRowStatus.5 active }}

At Switch3, Switch4, Swicth7 and Switch8

  • Create interfaces as up.
    [Index: Interface Number = 2]
    % snmp0 set {{ifMainAdminStatus.2 up }}
    % snmp0 set {{fsVcId.2 0 }}
    % snmp0 set {{fsVcIfRowStatus.2 active }}
    [Index: Interface Number = 3]
    % snmp0 set {{ifMainAdminStatus.3 up }}
    % snmp0 set {{fsVcId.3 0 }}
    % snmp0 set {{fsVcIfRowStatus.3 active }}
    [Index: Interface Number = 4]
    % snmp0 set {{ifMainAdminStatus .4 up }}
    % snmp0 set {{fsVcId.4 0 }}
    % snmp0 set {{fsVcIfRowStatus.4 active }}

© 2024 Cisco and/or its affiliates. All rights reserved.
 
For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms

For legal information about Accedian Skylight products, please visit: Accedian legal terms and tradmarks



Was this article helpful?

Changing your password will log you out immediately. Use the new password to log back in.
First name must have atleast 2 characters. Numbers and special characters are not allowed.
Last name must have atleast 1 characters. Numbers and special characters are not allowed.
Enter a valid email
Enter a valid password
Your profile has been successfully updated.