Clearing LLDP Remote Table

This section explains how to clear the LLDP remote table. LLDP remote table is updated whenever LLDP operates in Transmit and Receive/Receive Only modes.

1. Clear LLDP remote table by executing the following commands.

• Enter the Global Configuration mode.

your product# configure terminal

• Allow Switch to learn neighbors, and then clear LLDP remote table.

your product(config)# clear lldp table

• Exit from the Global Configuration mode.

your product(config)# end

2. View the remote table by executing the following command.

your product# show lldp neighbors

Capability Codes :
(R) Router, (B) Bridge, (T) Telephone, (C) DOCSIS Cable Device,
(W) WLAN Access Point, (P) Repeater, (S) Station, (O) Other
Chassis ID Local Intf Hold-time Capability Port Id
---------- ---------- --------- ---------- -------
Total Entries Displayed : 0