Exporting an Executor
  • 21 Jun 2024
  • 1 Minute to read
  • Contributors
  • PDF

Exporting an Executor

  • PDF

Article summary

Optionally, you can export a Job Executor, Flow Executor, Discovery Trigger or Module Discovery Trigger as a CSV file. All exported files will be transferred to another destination once the export process is finished.

Executor Export page (Commission ▶ Executor Export)
Exporting Executor_1.PNG

To export an executor and transfer it to another destination

  1. Access the page Commission ▶ Executor Export.

  2. Check the Enable export of executors checkbox.
    The Transfer settings form is now enabled.

  3. Complete the Transfer settings form.
    For more information on specific parameters, see the table below.

  4. Click Test to verify the connection status, ensuring that the destination can be reached with the transfer parameters entered.

  5. Click Apply.
    Full logs message will be exported and transferred to selected destination as a CSV file.

Transfer settings (Commission ▶ Executor Export)

ParameterDescription
File transfer protocolSFTP (Secure File Transfer Protocol)
UsernameThe user name used for connecting to the export destination.
PasswordPassword used for connecting to the export destination.
Destination folderEnter the path to a folder on the export destination server. The folder must already exist on the export destination server.
Destination addressIP address of the export destination server to which the exported file should be transferred.
PortThe port is used to connect to the export destination server.​

Typically, 22 would be the appropriate value for SFTP.

© 2024 Cisco and/or its affiliates. All rights reserved.
 
For more information about trademarks, please visit: Cisco trademarks
For more information about legal terms, please visit: Cisco legal terms

For legal information about Accedian Skylight products, please visit: Accedian legal terms and tradmarks



Was this article helpful?

Changing your password will log you out immediately. Use the new password to log back in.
First name must have atleast 2 characters. Numbers and special characters are not allowed.
Last name must have atleast 1 characters. Numbers and special characters are not allowed.
Enter a valid email
Enter a valid password
Your profile has been successfully updated.